494327
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
31
Connecting of the power cord.
32
Standard mode or toggle mode
The IRIX35 can run in the standard mode or the toggle mode.
Standard mode
In standard mode the IRIX35 is compatible with existing
X10 IR-transceivers. The user must press separately the address
number and the command on the remote control.
In the standard mode
it depends on the IR-code received which
action is taken.
Toggle mode
In toggle mode (one button mode) the user can send two
commands (ON or OFF) with one button (address number).
Which command is transmitted, depends on the present state
of the controlled object (ON/OFF). Independent of how long a
button is pressed; only one command will be transmitted.
Additional dim- or bright-commands can be transmitted if
receiving Dim- or Bright signals.
Note: When controling dimmers is required we
recommend to leave the IRIX35 in the standard
mode.
!
33
Standard mode (= default setting)
Toggle mode
Single letter code receiving mode
The IRIX35 can only receive signals of a single letter code.
If the letter code of the IRIX35 is programmed to any letter code
("A" to "P") the interface will only receive and forward the
programmed letter code.
*) Determined by IRIX35 when pressing a number on the remote control.
Send
ON
Current state Result state
ON ON
OFF ON
OFF
ON OFF
OFF OFF
Send
ON/OFF*
Current state Result state
ON OFF
OFF ON
34
Programming of the IRIX35
Programming the letter code
Send setup command
(letter and number code) (2x)
Press button
3 - 6 s
(Only for toggle mode)
Press button
6 - 9 s
LED continuous ON
Shortly press program switch
or wait 60 s
Address learn mode
LED blinks slowly
(flashes 5 x every 2 seconds)
Automatic process
to determine:
1.
2.
Current state of modules
Reaction to group
commands
Proces can take
aproximately 3 minutes
Operation mode
LED OFF
1 2
35
Entering in the programming mode:
Figure 1.
Press the programming switch in with a pointed object.
36
Programming the IRIX35 (cont'd.)
Programming the lettercode
To program a letter code into the IRIX35 please follow the next
steps:
1. Activate the programming mode by keeping the programming
switch pressed for 3 seconds. The LED will now lit.
2. Send Setup command, a letter code and a number code,
through the power line by an X-10 compatible transmitter to
the IRIX35. (E.g. Marmitek Home Control Box or
Programming Unit (
PRU256
)). Letter code "A" to "P" may be
programmed inclusive an arbitrary number code. For example,
to program letter code B, send B01 twice. The LED will blink
twice after receipt of two identical setup commands
(Address) in the program mode.
CHOOSE ACTION RESULT
Address Setup Command LED flashes
A01…P16 2 x Address 2 x
Note: It is not possible to program the IRIX35 with
a remote control only. To program the IRIX35 with
the remote control an additional remote control
receiver is required to send the setup commands
over the power line to the IRIX35.
!
1
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marmitek IRIX35 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marmitek IRIX35 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 0,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info