593748
2
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
HOW TO SET THE DUAL TIME
• Turn the crown to set the mode indicator to
“TIME” or “TIME ”.
Minute hand
First click
Crown
Dual time hand
Mode indicator
A B
1. Pull out the crown to the first click.
2. Turn the crown clockwise or counterclockwise
to set the dual time hand to the time of the
desired time zone.
* When setting the dual time hand, first advance
it one hour ahead of the desired time and
then turn it back to the exact hour.
3. Push the crown back in to the normal position.
Notes:
1. The minute hand also serves to indicate the
minutes of the dual time.
2. When setting the dual time with the crown at
the first click, do not depress button“A” or “B”
as the date indicator will move.
3. When turning the crown to set the dual time
hand, the hour and minute hands may move
slightly. However, this will not affect time
accuracy.
4. While the crown is kept at the first click, the
hour, minute and 24-hour hands stop moving,
and when the crown is pushed in, the hands
automatically move to indicate the current time
properly.
24-hour hand
Hour hand
Minute hand
Second click
Crown
Mode indicator
A B
HOW TO USE THE ALARM
Alarm setting
• Turn the crown to set the mode indicator to
SET”.
1. Pull out the crown to the second click.
2. Depress button “A” or “B” to set the hour,
minute and 24-hour hands to the desired alarm
time.
* For both buttons, the hands move quickly if
the respective buttons are kept depressed.
3. Push the crown back in to the normal position.
Notes:
1. When setting the hour hand, check that the 24-
hour hand is set properly.
2. As the alarm hands move, the dual time hand
moves correspondingly, retaining the time difference
between the current time and dual time. Therefore,
the alarm can also be set on the basis of the
dual time display by turning the alarm hands to
set the dual time hand to the desired alarm
time.
3. While the alarm hands are moving to indicate
the alarm time previously set, do not depress
any one of the buttons as the hands will stop
moving and the alarm will be set to the time
that the hands indicate.
Alarm engagement/disengagement
To engage the alarm, turn the crown to set the
mode indicator to “TIME ”.
* The alarm rings at the designated time for 15
seconds. To stop it manually, depress button
“A” or “B”, or turn the crown to change the
mode over to another.
* The alarm can be tested by keeping both
buttons “A” and “B” depressed at the same
time with the mode indicator at “TIME ”.
To disengage the alarm, turn the crown to set
the mode indicator to any mode other than “TIME ”.
HOW TO USE THE TIMER
Timer setting
• Turn the crown to set the mode indicator to
“TIMER”.
Second click
Timer second hand
Timer minute hand
1/10 second hand
Crown
Mode indicator
A B
1. Pull out the crown to the second click.
The timer minute hand indicates the time previously
set.
2. Depress button “A” or “B” to set the desired
amount of time.
* For both buttons, the hand moves quickly if
the respective buttons are kept depressed.
3. Push the crown back in to the normal position.
Notes:
1. If “0” minutes are set for the timer, it will not
start.
2. Once the timer is set, the set time can be used
repeatedly unless it is newly set.
Timer operation
• While in the “TIMER” mode, depress button
“B” to register the time previously set.
After the timer is set newly, it is not necessary
to follow the above step.
Depress the buttons in the following order.
A A A Time-up
Start Stop Restart
Warning
beep sounds
Restart and stop of the timer
can be repeated by depressing
button “A”.
* If button “B” is depressed after the set time is up
or while the timer is stopped, the timer is reset
to the set time again.
When 6 minutes or more are set for the timer,
the 1/10 second hand moves back and forth
every second while the second hand stops at “0”
position.
When the remaining time is 5 minutes or less,
the 1/10 second hand turns a full circle every
second, and the second hand turns counter-
clockwise at one-second intervals.
[Swing movement of the 1/10 second hand]
Notes:
1. When the remaining time is 3, 2 and 1 second,
a warning beep sounds, and when the set time
is up, it beeps for 2 seconds.
2. Even if the mode is changed from “TIMER” to
another, the timer continues counting and the
warning beep sounds in the manner described
above.
3. While the timer is used, the dual time hand
moves correspondingly with the hour hand but
does not indicate the remaining time.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lorus N945 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lorus N945 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info