680891
69
Verklein
Vergroot
Pagina terug
1/2025
Pagina verder
which results in the deletion of the former configuration. Instructions on firmware uploads via the serial
configuration interface are available here .
2
Reset-or-boot (standard setting): Press the button briefly to restart the device. Pressing the button for 5 seconds
or longer restarts the device and resets the configuration to its factory settings. All LEDs on the device light up
continuously. Once the switch is released the device will restart with the restored factory settings.
5
After applying the reset, the device will start fresh with factory defaults. All settings will be lost. Therefore,
you should save the current configuration if possible before the reset!
5
Please notice that also the WLAN encryption settings of the device will get lost in case of a reset and the
standard WEP key comes into effect again. The wireless configuration of a device with WLAN interface will
only succeed after a reset, if the standard WEP key is programmed into the WLAN adapter! After a reset, the
LANCOM access point returns to managed mode, in which case the configuration cannot be directly accessed
via the WLAN interface!
3.9 Scripting
Installations with multiple LANCOM devices often profit from the automatic execution of certain configuration tasks.
The scripting function in LANCOM enables entire sets of commands for device configuration to be stored in a single
file—a script—for transfer to one or more devices in one step.
3.9.1 Applications
Scripting provides users with a powerful tool for the centralized configuration of LANCOM devices, and thus a wide
range of potential applications:
1
Read-out device configurations in a form that is easy to read and save
The configuration files generated by LANconfig are not intended for processing with other tools; users will only get
an overview of the complete configuration from a print-out of the configuration file. The scripting functions can
output the configuration as ASCII text to be saved as a text file.
1
Edit the configuration with a simple text editor
If offline configuration with LANconfig is not possible or not desired, a configuration file generated by scripting can
be edited with a text editor and then uploaded to the device again.
1
Edit sections of the configuration
Instead of the entire configuration, smaller sections of it can be read out from a device instead (e.g. just the firewall
settings). Just as with complete configurations, sections can be edited and transferred to one or more devices. This
allows the particular settings in a device to be uploaded to other models or devices with a different version of the
firmware.
1
Automized configuration updates
The centralized storage of configuration scripts in combination with scheduled LCOS commands (cron jobs) can be
used to keep vital sections of the configuration in multiple devices up to date, e.g. the encryption settings for a
WLAN.
1
Convenient roll-out for larger installations
The installation of multiple devices at different locations can be very easily controlled from a central location. Even
employees without administrator rights can then set up the devices with a single command.
1
Storage of configuration to volatile memory only
69
Reference Manual
3 Configuration
69

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lancom LCOS 9.10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lancom LCOS 9.10 in de taal/talen: Engels als bijlage per email.

De handleiding is 54,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info