513471
10
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
EEB 9550.0 27
The electronic timer
As well as providing a short-time alarm for reminders, the electronic timer con-
trols the oven in several other ways. You can use it to set the cooking time
and the finish time. All functions are available in any mode or temperature
selection.
Display:
Time, alarm time (actual value in each
case)
Lamps, showing that the oven is
switched on.
Lamps (for each selector button/function)
Selector buttons:
7
Cooking time
8
Finish time
4
Alarm time
Adjust:
+/- for altering the values of all functions.
Setting/changing the clock
Push simultaneously “
7
” and
8
”, until the time in the display
flashes.
Adjust as required using “+”/“
-”.
Wait for the display to stop flashing. The
time will then be accepted, and the dot
in the centre of the hour and the minu-
tes will flash every second.
Setting the alarm time
You can use the alarm on its own, without effecting the oven.
–Press
4
”. The lamp will flash. The dis-
play will read “0.00”.
Use “+”/“
-” to set the timer in minutes
and seconds.
Start the timer with “
4
” or wait until the
lamp stops flashing. You will see in the
display the time remaining until the buz-
zer sounds.
An acoustic signal is generated when the
alarm time has elapsed.
Press any button to stop the buzzer. The display will show the normal clock
again.
This is how to programme the switching operations
1. Selecting the operation:
Press the selector button for the operation you wish to use. The lamp above
the button you have pressed will start to flash and a number will appear in
the display.
2. Altering/adjusting the operation:
Adjust the value shown, using “+” and “-”.
3. Starting the operation:
If you do not press another button for 3 seconds, the operation will commence
automatically and the lamp will stay on all the time.
F
You can reduce the time by pressing a selector button:
- the previously selected button confirms the input and starts the operation.
- another button confirms the input and selects the new operation you have
chosen.
4. Setting the oven functions (switching functions only):
Use the mode selector to select the mode and the temperature control to
select the temperature.
If you wish, you can set the temperature and mode before programming the
timer.
Changing the setting
If you wish to alter a setting you have made – even if the operation is running
– push the appropriate button again and use
+”/“-” to change the value in
the display.
When the cooking time is finished
the oven will switch off and “End” will ap-
pear in the display. A warning signal will
sound. Both of the lamps next to the dis-
play will stop flashing.
Press any selector button to stop the alarm buzzer.
The display will show the normal clock again. The oven starts again.
Turn the temperature control and the mode selector switch to “0”.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kuppersbusch EEB 9550.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kuppersbusch EEB 9550.0 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kuppersbusch EEB 9550.0

Kuppersbusch EEB 9550.0 Gebruiksaanwijzing - Nederlands - 15 pagina's

Kuppersbusch EEB 9550.0 Gebruiksaanwijzing - Deutsch - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info