707422
23
Verklein
Vergroot
Pagina terug
1/73
Pagina verder
19
WAVE
CONTROL 1 [0...127]:
You can modify the waveform by
adjusting this value.
A setting of 0 will produce a triangle
wave, and a setting of 127 will pro-
duce a waveform with a pitch that
is one octave and a fifth higher.
(Figure 3-3)
CONTROL 2 [0...127]:
LFO1 is used to apply wave form
modulation to the waveform speci-
fied by "CONTROL 1." The "CON-
TROL 2" setting specifies the depth
of the modulation produced by
LFO1.
Figure 3-3
063 127
Sine Wave ( ):
This is a sine wave. This waveform
contains only the fundamental, and
no overtones at all. It can be used
to create claves or bass drum
sounds. In some synth programs,
oscillator 2 is used to perform cross
modulation*
3-2
(Figure 3-4), creat-
ing a more complex overtone struc-
ture.
Cross modulation by a sine wave
cannot be applied to a vocoder pro-
gram.
Since a sine wave contains no
overtones, the filter will not
modify its tone.
CONTROL 1 [0...127]:
On a synth program, this adjusts the
depth of cross modulation.
On a vocoder program, this modi-
fies the waveform.
CONTROL 2 [0...127]:
On a synth program, this adjusts the
depth of additional modulation ap-
plied by LFO1 to the cross modula-
tion specified by "CONTROL 1."
On a vocoder program, this adjusts
the depth of modulation applied by
LFO1 to the waveform that you se-
lected by "CONTROL 1."
Figure 3-4
OSC2
OSC1
X-mod Depth + X-mod Depth Mod
OSC1 Output
*3-2: Cross Modulation
This is a type of oscillator modula-
tion available on analog synthesizers
of the past. Normally, a low-fre-
quency signal (such as from an LFO)
is used as the modulation source for
an oscillator, but Cross Modulation
lets you use another oscillator as the
modulation source, creating sounds
with a complex overtone structure
that would not normally be produced
otherwise. On the microKORG S, you
can use oscillator 2 to apply cross
modulation if a sine wave is selected
for oscillator 1. Gradually raise the
"CONTROL 1" level, and notice how
the sound changes. This can produce
distorted sounds, or sounds with a
metallic character.
You can produce an even wider vari-
ety of effects by adjusting the OSC2
"SEMITONE" or "TUNE" parameters.
You can also achieve interesting re-
sults by applying sync modulation
and cross modulation at the same
time.
Vox Wave ( ):
This simulates a waveform similar
to human vocal cords. Even if the
oscillator pitch is changed, the fre-
quency spectrum will be main-
tained, which makes this effective
when used for vocal-type sounds or
as a vocoder oscillator.
Select HPF or BPF as the filter, and
adjust "Cutoff" to create a vocal-
type sound.
CONTROL 1 [0...127]:
Adjusting this value will modify the
waveform. (Figure 3-5)
CONTROL 2 [0...127]:
LFO1 is used to apply modulation
to the waveform specified by
"CONTROL 1." CONTROL 2 sets
the depth of the modulation ap-
plied by LFO1.
Figure 3-5
063127
3. OSC1 (Oscillator 1) — SYNTH/VOCODER
Triangle Wave ( ):
This is a triangle wave, which has
weaker overtones and a stronger
fundamental than a sawtooth wave
or square wave. It is suitable for
mellow bass sounds.
CONTROL 1 CONTROL 2
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg microKORG S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg microKORG S in de taal/talen: Engels als bijlage per email.

De handleiding is 6,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Korg microKORG S

Korg microKORG S Gebruiksaanwijzing - Deutsch - 73 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info