707422
71
Verklein
Vergroot
Pagina terug
1/73
Pagina verder
67
Troubleshooting
Before you suspect a malfunction, please check the following points.
Power does not turn on
Is the AC adaptor connected to an AC outlet? p.6
If you are using batteries, are batteries installed? Have the batteries run down?
p.6
No sound
If your powered monitor system or headphones connected to the correct
jack(s)? p.5
Is the connected monitor system powered-on, and is the volume raised?
Is the VOLUME knob set to a position where sound will be output? p.6
Is the MIDI "LOCAL" setting turned ON? p.51
Were any volume-related parameters set to a value of 0? p.23, 27, 34, 37
Was the FILTER "CUTOFF" set to 0? p.24
Did you turn the FORMANT HOLD key on ("E.F. SENSE" HOLD) while there
was no input to AUDIO IN 1? p.10, 35
Can’t input sound
Is the input source connected to the AUDIO IN 1 CONDENSOR jack or
DYNAMIC jack, or to the AUDIO IN 2 LINE jack? p.10, 21, 34
If you are inputting to AUDIO IN 1 or AUDIO IN 2, is the VOLUME 1 or
VOLUME 2 knob turned up? p.10, 21, 34
If you are inputting to AUDIO IN 1, is the MIC/LINE switch set appropriately?
p.4
If using a vocoder program, have you connected the modulator audio source to
the AUDIO IN 1 CONDENSER jack or DYNAMIC jack? p.10
If you have connected an input device to the AUDIO IN 1 CONDENSER jack and
also to the DYNAMIC jack, the input from the CONDENSER jack will take
priority, and no signal can be input from the DYNAMIC jack. p.4
Can't edit
If the display does not switch to the parameter indication when you turn the
edit control knobs 15, Performance Edit may be active. p.8, 12
If you are unable to use the edit control knobs 15 to edit the parameter value,
did you remember to turn the knob to a position that matches the displayed
value? p.13
If you are unable to edit timbre 2 of a synth program, has VOICE "SINGLE/
LAYER" been set to LAYER? p.14, 16
If you are unable to edit timbre 1 or 2 of a synth program, is the TIMBRE SELECT
1/2 LED lit for the timbre you want to edit? p.14
If the changes you made to a program or to the global settings have not been
remembered, did you turn the power off before executing the Write operation? In
the case of a program, your edits will also be lost if you select a different program.
Execute the Write operation to save your edits before you switch programs or turn
off the power. p.58
Can't write programs or global settings
Is Shift function “MEMORY PROTECT” turned OFF? p.64
If an edited program or edited GLOBAL, MIDI, or SHIFT settings you thought
you had saved have not actually been saved, did you set the EDIT SELECT 1 or
EDIT SELECT 2 dial to one of the VOICEARPEG.B position when you at-
tempted to save the program, or to the GLOBAL or MIDI position when you
attempted to save the global data? p.58
Arpeggios do not start
Is the arpeggiator turned on (ON/OFF key lit)? p.11
Is the MIDI "CLOCK" setting correct? p.51
No response to MIDI messages sent from an external device
Is the MIDI cable connected correctly? p.48
Does the MIDI channel of the data transmitted from the external MIDI device
match the MIDI channel of the microKORG S? p.49
Does not respond correctly to MIDI messages sent from an external device
Is the SHIFT function "MIDI FILTER" for that type of MIDI message set to Enable?
p.61
Transpose, velocity curve, and arpeggiator data is not recognized correctly
Is MIDI "POSITION" set appropriately? p.47
Can't control two timbres on separate MIDI channels
The microKORG S uses only one MIDI channel to transmit and receive. You
cannot use two MIDI channels to play the two timbres independently.
71

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg microKORG S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg microKORG S in de taal/talen: Engels als bijlage per email.

De handleiding is 6,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Korg microKORG S

Korg microKORG S Gebruiksaanwijzing - Deutsch - 73 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info