707422
14
Verklein
Vergroot
Pagina terug
1/73
Pagina verder
10
Vocoder programs
1. Playing a vocoder program
Here's how to connect the included mic and play a vocoder program.
A vocoder applies the spectral character of an externally-input voice (the "modula-
tor") to an oscillator or other sound (the "carrier"), and outputs the result. In the
most popular use of a vocoder, you can speak or sing into a mic and play chords on
the keyboard, to create the impression that an instrument is speaking or singing.
Alternatively, you can create a variety of interesting effects by inputting audio
signals other than a human voice (such as
rhythm sounds).
1
On the rear panel, turn the AUDIO IN 1
VOLUME 1 knob to the MIN position, and
set the MIC/LINE switch to the MIC
position.
2
Connect the included mic to the AUDIO IN
1 CONDENSER jack.
If you use a mic other than the included
one, connect it to the appropriate jack.
3
Select a vocoder program.
Using the procedure described on page 8,
select program "A.84" for this example.
With the factory settings, the VOCODER bank contains vocoder programs.
Notice that the SYNTH/VOCODER LED VOCODER is lit.
4
Vocalize into the mic, and turn the VOLUME 1 knob toward MAX without
allowing the AUDIO IN 1 LED to light red.
Raising the AMP "DIRECT LEVEL" value will cause the input sound to be
output directly, so raise the level if you want to hear the input sound while you
make adjustments. (p.37)
5
While vocalizing into the mic, play the keyboard.
Try pronouncing different words and changing the chords you play, and listen
to the vocoder effect.
If you cannot hear the effect, try adjusting the AMP "LEVEL" (knob 1) (p.37)
or MIXER "OSC 1 LEVEL" (knob 1) (p.34).
6
While vocalizing into the mic and using the keyboard to play vocoder sounds,
you can "freeze" the current tone of the vocoder by pressing the FORMANT
HOLD key. This allows you to continue to play the current vocoder sound, even
when you are not vocalizing. This tone will be remembered when you Write the
vocoder program to memory.
Several of the VOCODER bank programs will sound even if you simply play
the keyboard. These programs were written with FORMANT HOLD turned on.
2. Modifying the sound
In the same way as for a synth program, you can modify the sound of a vocoder
program by turning the edit control knobs 15, by moving the PITCH and MOD
wheels, and by the way that you play the keyboard. As described on the preceding
pages, try out various changes for the selected program.
The following Performance Edit operations work differently than for a synth
program.
Knob
1
: CUTOFF, Knob
2
: RESONANCE:
These control the carrier by adjusting the band pass filter cutoff frequency of the
carrier. See page 35.
Knob
3
: EG ATTACK, Knob
4
: EG RELEASE:
Only the amp EG can be controlled.
Also, a vocoder program does not allow you to switch timbres.
Included mic
1 1, 4 2
46
Edit control knobs 1–5
3
SYNTH/VOCODER
LED
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg microKORG S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg microKORG S in de taal/talen: Engels als bijlage per email.

De handleiding is 6,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Korg microKORG S

Korg microKORG S Gebruiksaanwijzing - Deutsch - 73 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info