707333

Korg microKEY Air Handleiding

3
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
Owner’s Manual En
microKEY Air/microKEY Controls
6
7
8
1234
6
7
5
microKEY
microKEY Air
1. Keyboard
The microKEY Air and microKEY are equipped with velocity-sensitive mini-
keys.
2. Power Indicator
RED : (microKEY Air/microKEY)
Connected using the USB port and receiving power via USB.
BLUE : (microKEY Air)
Waiting to connect (Blinking) or connected (Steady) via a wireless connection.
PURPLE : (microKEY Air)
Indicatesthebaerylevelislowwhenconnectedviaawirelessconnection.
3. Octave DOWN and UP buttons
By transposing the keyboard up or down in one-octave steps, the Octave but-
tonsprovideaccesstotheentirenoterange.PresseitherOctavebuonrepeat-
edly to select the desired note range.
Octave shift status ±0 +1/-1 +2/-2 +3/-3 +4/-4(37 key only)
Octave LED color Unlit Green Orange Red Blinking red
TIP SimultaneouslypressingtheOctaveUPandDOWNbuonswillresetthe
Octave shift back to ±0.
4. PITCH Bend wheel
Use this wheel to send pitch bend messages and add expression to your per-
formance. The spring-loaded center-zero design allows you to bend the pitch
up or down.
5. MOD wheel
Use this wheel to send modulation messages. The factory default control
change number is set to CC#1 (Modulation).
6. ASSIGNABLE SWITCH jack (Pedal Input)
This standard 1/4” input jack can accept a PS-1 footswitch or DS-1H damper
pedal (sold separately). The factory default control change number is set to
CC#64 (Damper).
When the microKEY Air/microKEY is turned on, the polarity of the connected
foot switch is automatically detected. When using the foot switch, connect it
before turning on the microKEY Air/microKEY. Do not touch the pedal while
turning the microKEY Air/microKEY on.
7. USB Port
Use this USB-B port to connect the microKEY Air/microKEY to your computer
using a USB cable. Connecting the USB Cable will turn the microKEY On. If
the Mode Switch (microKEY Air) is set to USB (see below), connecting the
USB cable will turn the microKEY Air On.
8. Mode Switch (microKEY Air only)
The microKEY Air can connect to your computer via USB or Bluetooth Wire-
less.
WIRELESS : ThemicroKEYAirconnectstothecomputerviaBluetooth;power
isprovidedbytheinternalbaeries.
USB : ThemicroKEYAirconnectstoyourcomputerusingtheUSBcable;pow-
er is provided from the computer via USB.
Getting Connected (Connecting via USB)
Connections and power
microKEY Air
microKEY
USB
Pedal switch
（PS-1pedal switch,
DS-1H damper pedal, etc.）
Computer
1. Mode Switch (microKEY Air Only)
Set the Mode Switch to USB and continue to Step 2. For the microKEY, skip
to Step 2.
2. Connect the USB Cable
ConnectoneendoftheUSBcabletoyourcomputer;connecttheotherend
to the USB-B port on the microKEY or microKEY Air. Use only the USB cable
provided.Once connected to the computer, the microKEY Air/microKEY will
turnOn;thePowerIndicatorLEDwillglowred.
TIP Windows Users :
WhenthemicroKEYAir/microKEYisrstconnectedtoyourWindowscom-
puter, the USB-MIDI driver pre-installed with the operating system will be
used automatically. This pre-installed USB-MIDI driver will not allow the mi-
croKEY Air or microKEY to access multiple programs or applications at the
same time. To remedy this situation, simply download the KORG USB-MIDI
driver at www.korg.com and install the driver as instructed with the support-
ing documentation.
Turning o the Power
1. Disconnect the USB Cable
Disconnect the USB cable from the microKEY Air or microKEY. Once discon-
nected the Power Indicator will go dark (unlit).
microKEY Air users : Set the Mode Switch set to USB before disconnecting the
USB cable.
Getting Connected (Connecting via Bluetooth)
(microKEY Air only)
Inordertousethedevicewirelessly,thedevicemustberunningonbaery
power.
Installing the Batteries
Be sure the USB cable is disconnected from the mi-
croKEYAirbeforeproceeding.Openthebaerycover
ontherearpanelandinstalltwoAAbaeries.Besure
to observe the correct polarity. Finally, close the bat-
tery cover.
If the microKEY Air encounters an operational er-
ror that connot be cleared or resolved by turning
thepowerOnandO,tryremovingandre-install-
ingthebaeries.
Turning on the power
Set the Mode Switch to WIRELESS. The microKEY Air will turn on, and the power
LED will blink in blue to indicate the connection standby mode. Once the connec-
tion has been established, the Power Indicator LED will change from a blinking
to a steady blue light.
WIRELESS
microKEY Air
Pedal switch
(PS-1 pedal switch,
DS-1H damper pedal, etc.)
Connections
For details on connecting to an iPhone/iPad or Mac, or to a Windows PC, refer to
“BluetoothMIDIConnectionGuide.”Downloadthelatestversionofthe“Blue-
toothMIDIConnectionGuide”fromtheKorgwebsite(hp://www.korg.com/).
Turning o the power
1. Set the Mode Switch to USB.
Thiswillturnothewirelesslinkandwill turn the microKEYAiro;the
Power Indicator will go dark (unlit).
microKEY Air users : If your microKEY Air is connected to the computer via
USB, placing the switch in the USB position will active the USB connection,
andtheunitwillnotturno.Inthiscase,youmustalsoremovetheUSBcable
from the microKEY Air.
Customizing the MIDI Settings
Easy to use and simple in design, the Korg microKEY Air and microKEY also
allow you to access a variety of performance features and operational parameters
using the Korg Kontrol Editor software. The Korg Kontrol Editor is available as
a download directly from hp://www.korg.com/corporate/distributors/ or from hp://
www.korg.com/.
MIDI Channel
The MIDI channel microKEY Air/microKEY should be set to match the MIDI
channel of the software or application being used.
• MIDIChannel[1...16]
This species which MIDI channel the microKEY Air/microKEY will use to
transmit note messages, pitch bend messages, and other MIDI messages that are
sent when you use the MOD wheel, damper pedal, etc.
Keyboard
InadditiontousingtheOctaveUP/DOWNbuonsonthefrontpanel,youcan
also transpose the microKEY Air and microKEY to play in any musical key. In
addition, the touch response of the keyboard (Velocity Curve) can be adjusted to
matchyourplayingstyleortocreateadierenteect.
• Transpose[-12...+12]
The Transpose parameter can transpose the pitch of the keyboard up or down in
semitone steps. The range is -12 to +12.
• VelocityCurve[Curve1...8/Const]
Adjustthevelocitycurvetodeterminehowkeyboarddynamicswillaectthe
outputlevel.ThereareeightVelocityCurvestochoosefrom;youcanalsoselect
anyxedvelocity—idealforreplicatingorgans,harpsichords,andotherinstru-
ments that lack keyboard dynamics.
1 Heavy Requiresastrongstriketoproducethemaximumeect.
2
|
A curve that's closer to normal than 1.
3 A curve that's closer to normal than 2.
4 Normal A normal curve.
5
|
Allowsevensoftstrikestoproduceaneect.
6
Acurvethatallowsevensofterstrikesthan5toproduceaneect.
7
Allows medium-strength strikes to produce a constant but less
dynamiceect.
8
Light
Acurvethatisaerthan7.
Const – The velocity value will always be constant.
• ConstVelocityValue[1...127]
If Const (Constant Velocity) is selected as the Velocity Curve, then this parame-
ter will be available to set the Constant Velocity Value. Every note will play with
the same MIDI value selected here.
Mod Wheel
By default, the MOD wheel is set to MIDI CC#1 (Modulation Amount). These
parameters allow you to change this CC#, plus you can set upper and lower values
for the Modulation. In addition, the Function of the MOD wheel can be completely
disabled.
• WheelEnable[Disable/Enable]
When set to Disable, the wheel will not transmit any MIDI messages.
• ControlChangeNumber[0...127]
You can select any MIDI CC#, allowing the MOD wheel to control nearly any
MIDI parameter.
• UpperValue[0...127]
ThisparameterspeciesthevalueoftheCCmessagethatistransmiedwhen
the wheel is pushed all the way up.
• LowerValue[0...127]
ThisparameterspeciesthevalueoftheCCmessagethatistransmiedwhen
the wheel is pulled all the way down.
Assignable Switch
By default, the ASSIGNABLE SWITCH jack is set to MIDI CC#64 (Damper). These
parameters allow you to change this CC#, plus you can set the polarity of the
pedal, or allow the microKEY Air/microKEY to detect the polarity automatically.
• ControlChangeNumber[0...127]
YoucanselectanyMIDICC#,allowinganaachedpedalswitch(soldseparate-
ly) to control nearly any MIDI parameter.
• Polarity[Auto/-/+]
AUTO : When the microKEY Air/microKEY is turned on, the polarity of the foot
switch is automatically detected.
-, + : Choose one of these values to specify the polarity manually.
Wireless (microKEY Air only)
• AutoPowerO[Disable/Enable]
WhenAutoPowerOissettoEnable,themicroKEYAirwillautomaticallyturn
oifnooperationsareperformedafter4hours.ToturnthemicroKEYAirback
onaftertheAutoPowerOfunctionhasturnedito,settheModeSwitchto
USB, and then return it to the WIRELESS position.
• BatteryType[Alkaline/Ni-MH]
SetthisparametertomatchthetypeofbaeriesinstalledinthemicroKEYAir.
Select“Ni-MH”whenusingnickel-metalhydridebaeries,or“Alkaline”when
usingalkalinebaeries.
• DeviceName
This parameter allows you to specify the name (up to 25 alpha-numeric charac-
ters)thatwillappearontheBluetoothenableddevicewhenseingupawireless
link.
TheseseingswillbeappliedthenexttimethatthemicroKEYAiristurned
o,thenonagain.
Restoring the Factory Settings
During a USB connection, to restore all of the microKEY Air/microKEY pa-
rameters back to their original factory values, hold down both the Octave
UPandOctaveDOWNbuonswhileturningthepoweron.
Theprocess ofrestoringthefactoryseings willtakeseveralseconds
afteryouturnonthepower.Youmustnotturnothepowerduringthis
time.
Thefactoryseingscannotberestoredduringawirelessconnection.
Troubleshooting
Here is a quick guide to resolving some common issues.
microKEY Air/microKEY will not turn on
•When used in the wireless mode, the microKEY Air is powered by two AA
baeries.Besurethebaerieshavebeeninstalledcorrectly.
•The microKEY may not receive enough power from a non-powered (pas-
sive) USB hub. In this case, switch to a powered (active) USB hub, or sim-
ply connect the microKEY directly to the computer.
The microKEY Air cannot establish a wireless link (mi-
croKEY Air only)
•Verify that your computer or iPhone/iPad is compatible with Bluetooth
4.0.
•Verify that the operating system for your computer or iPhone/iPad is com-
patible with Bluetooth Low Energy MIDI. Compatible operating systems
are Mac OS X Yosemite or later, Windows 8.1 or later (KORG BLE-MIDI
Driver is required), and iOS 8.0 or later
Software programs do not respond
•Conrm thatthemicroKEYAir/microKEY is selected intheMIDIport
seingsoftheapplicationthatyou’reusing.
•Incertaincases,theselectedapplicationmaynotsupportaspecicfunc-
tion.Pleasechecktheowner’smanualofyourhostapplication.
The pedal operation is reversed
•The polarity of the connected footswitch is automatically detected when
the power is turned on. Be sure the pedal is connected BEFORE the power
is turned on, and do not touch the pedal while turning the microKEY Air/
microKEY on.
The keyboard does not respond to keyboard dynamics
•Verify that the Keyboard Velocity Curve is not set to Const. (Constant
Value).
Specications
Wireless method (microKEY Air): Bluetooth Low Energy
Connectors: USB-B connector (for computer connection)
ASSIGNABLE SWITCH jack
Power supply: USB bus power mode (for a USB connection)
 TwoAAbaeries(forawirelessconnection)(microKEYAir)
Baeryservicelife(microKEYAir):
Approximately20hours(whenusingalkalinebaeries)
Current consumption: 100 mA or less
Dimensions(W×D×H):
33.46×5.47×2.13 inches / 850×139×54 mm
(MICROKEY2-61AIR / MICROKEY2-61)
27.91×5.47×2.13 inches / 709×139×54 mm
(MICROKEY2-49AIR / MICROKEY2-49)
22.24×5.47×2.13 inches / 565×139×54 mm
(MICROKEY2-37AIR / MICROKEY2-37)
Weight: 3.75 lbs. / 1.7 kg (MICROKEY2-61AIR / MICROKEY2-61)
3.09 lbs. / 1.4 kg (MICROKEY2-49AIR / MICROKEY2-49)
2.20 lbs. / 1.0 kg (MICROKEY2-37AIR / MICROKEY2-37)
Includeditems: USBcable,Owner’smanual
Operating requirements (USB connection)
Windows : Microsoft Windows 7 SP1 or later (32bit/64bit).
Mac : OS X Mountain Lion 10.8 or later.
Operating requirements (WIRELESS connection)(microKEY Air)
Windows :
Computer installed with Microsoft Windows 8.1 or later and compat-
ible with Bluetooth 4.0 (KORG BLE-MIDI Driver is required)
Mac : Mac installed with OS X Yosemite 10.10 or later and compatible with
Bluetooth 4.0
iOS : iPhone/iPad installed with iOS 8 or later and compatible with Blue-
tooth 4.0
Keyboard functionality is not guaranteed with all computers that satisfy
these system requirements.
* Specicationsandappearancearesubjecttochangewithoutnoticeforim-
provement.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Korg microKEY Air bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Korg microKEY Air in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 3,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info