584811
5
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
Page 8 Page 9
Cables, Crossovers and Connections
For best results, connect your loudspeakers with purpose-designed loudspeaker
cable. The cables to both loudspeakers should be of equal lengths and be of a
gauge sucient to drive the speakers comfortably without any loss of power in the
bass at high volumes.
We recommend a minimum wire diameter of 14 AWG. If you are in any doubt,
you should connect the loudspeakers before you connect the amplier. If you are
replacing a existing pair of loudspeakers, we suggest you de-wire the amplier rst.
There are two crossover networks in the P-38F, P-37F, P-17B and P-27C. One panel
is a dedicated bass network. The second panel is a network for the midrange and
treble units . The networks terminate in a custom designed bi-wire terminal panel located on the lower back
panel of the loudspeaker. As the low and high frequency elements can be separately connected, two types of
wiring are possible: standard wiring and bi-wiring.
The terminal panel accepts a wide variety of connectors, including spade lugs, pins or bare
wire. If you have no preference, your dealer can advise you as to appropriate connectors.
The instructions in this user guide relate to bare wire. If you use alternative connectors,
consult your dealer or the hardware suppliers literature.
Standard loudspeaker cable is comprised of two conductors, with one core having a ridge
or stripe. We suggest you connect the striped conductor to the Positive (RED) terminal in all
cases. This will ensure that the loudspeakers are properly connected and in phase.
Split the cable to a depth of 1½”. Strip ½” of insulation. If the wire is stranded, lightly twist
the ends together to ensure no stray ends of cable can short adjacent terminals.
Connecting a Terminal
Partially unscrew the terminal.
1: In the base of the terminal, there is a hole. Insert the bare end of the wire into
the hole.
2: Tighten each connector hand tight. After connecting all the terminals, check
that there are no stray strands of bare wire that can reach across and short out
adjacent terminals.
3: When you are sure that all the connections are correct, insert the Allen key into
the socket in each terminal head and tighten fully to secure them. DO NOT
over-tighten the terminals, or you may damage them. (An Allen key (hex
wrench) is provided in the accessories carton.)
Positioning Center and Surrounds
Center Channel Positioning
The P-27C is a dedicated center channel speaker that should be placed as close as possible to the center of
your video display. In installations with large projection or display screens, the speaker is traditionally placed
immediately below the screen and positioned with an upward tilt. (See the section on “Fitting the Spikes for
more information.) The degree of tilt will depend on many factors, including the size of your video screen and
the distance to your listening/viewing position. The center channel should also be placed equidistant from the
left and right main channel speakers.
Surround Channel Positioning
The P-27S is a dedicated surround channel
speaker that is used to provide sound for
the rear eects channel of a digital sur-
round system, or as additional speakers
in a multi-channel music conguration.
The placement of the speakers will vary
depending upon the installation and
the type of system conguration. The
P-27S is designed to be wall-mounted
and includes mounting provisions on the
back. Make sure you use an appropriate
size screw head and that it is anchored
securely to a wall stud or wall anchor with
suitable weight-bearing capacity. Never
use the wall bracket for mounting the
P-27S to the ceiling.
For 5.1 systems, the surround speak-
ers are traditionally placed directly at or
just slightly behind the sides of the listening / viewing position. They should be placed approximately 4-5ft
(1.2-1.5m) above the oor. This distance can vary depending on the conguration of your room.
For 7.1 systems, the left and right side surrounds would be positioned as described above for a 5.1 system.
Two additional speakers would be added on the back wall of the room and should be placed relatively close
together. In most cases, you should position them from 12”-48” (1-1.2m) apart. They should be placed at the
same height as the side surrounds.
LFE 2 LFE 1
CENTER
SL
SR
SL
(alt.)
or SBL
SR
(alt.)
or SBR
LR
Front View Side View
4-5ft
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klipsch P-27S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klipsch P-27S in de taal/talen: Engels als bijlage per email.

De handleiding is 1,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info