584811
9
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
Page 16 Page 17
Loudspeaker Components -3Loudspeaker Components -2
Treble Compression Driver
Low distortion, high sensitivity, wide bandwidth and neutral tonality have been,
in this ground-breaking design, pushed beyond the standards for any previous
Klipsch driver.
Built around a .75-inch titanium dome, the tweeter makes use of two very large
high temperature N35H neodymium magnets in an unconventional congura-
tion. The titanium dome and surround are formed as one common unit.
The chamber behind the tweeter dome is resistively damped via a lled tube to
reduce reection of the back wave—and thereby the distortion that would otherwise be produced.
The phase plug that puts the dome into a compression mode also has a unique chamber within it that extends
the upper frequency limit of the driver. This proprietary technique oers numerous benets, including the elimina-
tion of undesirable standing waves in the high pressure layer between the phase plug and horn. The result is a
smooth impedance transfer function, and a benign load on the partnering amplier. Additionally, this technique
produces smoother amplitude response through the high frequency range. With its unique horn and phase plug,
the tweeter demands far less drive current from the ampli-
er, so the driver can maintain full dynamic capability at any
volume level.
This driver is inherently at from 3 KHz to 30 KHz. and has an
inherent sensitivity some 10 dB greater than direct radiating
designs. Distortion is also reduced by a factor of 10 dB, against
conventional tweeters.
Crossover Network
Through very accurate driver engineering, the system oers excellent perfor-
mance without the need for corrections in the crossover network. A cross-
over should provide a smooth transition from driver to driver, allowing each
element to operate at its optimum performance within its designed frequency
range. This accomplished, the network can be a straightforward design and
use extremely high quality parts without imposing unnecessary budget con-
straints. A simple, elegant crossover also means the speaker will have a more
direct and coherent character as compared with products that must employ
complex networks to iron out their shortcomings. Polyester capacitors along
with all air-core inductors, ensure
best performance and longev-
ity. The network produces
a fourth-order electro-acoustic lter when combined with the
smooth, natural roll o of the drivers.
Cabinet
Functionally, any loudspeaker enclosure provides a mechanical placement
of each transducer, a method for suppressing acoustical radiations and a reso-
nant chamber to extend low frequency performance. The Palladium Series is
an artistic blend of beauty and functional performance. Its industrial design
was guided by the global consultancy of BMW Group DesignworksUSA.
Enclosure resonances can be suppressed through the geometry of the enclo-
sure and mass of the panels. The Palladium Series enclosures contain nonpar-
allel wall structures and thick, high mass walls. Nonparallel wall structures sig-
nicantly decrease standing waves. Cabinet wall
thicknesses are a minimum of 1-inch thick with
an even thicker front bae. Custom inner and
outer laminated panels sandwich a middle layer of dissimilar material designed with a
dierent mechanical impedance to ensure the cabinet does not color the sound.
To further increase enclosure stiness, “H” braces are strategically positioned in the
enclosure to reinforce the structure, control resonance and minimize modal stand-
ing waves. The massive front bae design allows all woofers and the mid/high horn
structure to mount ush to the exterior edge. The width of the front bae has also
been minimized to decrease the total area. A smaller front bae directly correlates
to improved o-axis performance. The overall enclosure was designed to extend the
low frequency response of the woofers. This fourth-order, vented enclosure contains
tuned ports cleverly blended into the rear of the enclosure. Just below the ports on
the P-38F and P-37F , a high mass aluminum and steel base is integrated into the
bottom of the enclosure. The base contains four adjustableoor anchors, which
decouple the cabinet from the oor by supporting the cabinet at just four points.
Tractrix® Horn Design
Horn-loaded technology is the driving force behind the remark-
ably accurate Klipsch sound. Horns oer high eciency, low
distortion, controlled directivity and at frequency response,
allowing them to more closely reproduce the quality and tonal
characteristics of live sound. In the Palladium Series, the high and
mid-frequency drivers both use the latest evolution of our Tractrix®
Horn design, featuring a 90° x 60° coverage pattern and a lofted
throat design for exemplary on-axis response. These horns have
been molded as a single unit, using a proprietary, acoustically in-
ert, carbon-infused thermoset composite material. The high- and
mid-frequency drivers are connected to the horns via chamber-
dampened phase plugs that result in a 4:1 compression ratio,
delivering remarkable eciency with astonishingly low distortion.
This arrangement allows the Palladium Series to provide a unique
combination of precision, clarity and eortless power.
Bass Network
Mid and Treble Network
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Klipsch P-27S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Klipsch P-27S in de taal/talen: Engels als bijlage per email.

De handleiding is 1,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info