483666
4
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
4
A
5 ADDITIONAL SAFETY INSTRUCTIONS
Do not place your hand over the air vents or block the vents in any way.
The nozzle and accessories of this tool become extremely hot during use. Let these parts cool down before
touching.
Always switch the tool o before putting it down.
Do not leave the tool unattended while it is switched on.
A re may arise if the appliance is not used with care
Heat may be conducted to combustible materials hat are out of sight.
Do not use in a damp atmosphere, where ammable gases may be present or near combustible materials.
Allow the tool to cool fully before storing.
Ensure adequate ventilation as toxic fumes may be produced.
Do not use as a hairdryer.
Do not obstruct either the air intake or nozzle outlet, as this may cause excessive heat build up resulting in
damage to the tool.
Do not direct the hot air blast at other people.
Do not touch the metal nozzle as it becomes very hot during use and remains hot for up to 30 minutes
after use.
Do not place the nozzle against anything while using or immediately after use.
Do not poke anything down the nozzle as it could give you an electric shock. Do not look down the nozzle
while the unit is working because of the high temperatures being produced.
Do not allow paint to adhere to the nozzle or scraper as it could ignite after some time.
6 REMOVING PAINT
Do not use this tool to remove paint containing lead. The peelings, residue and vapors of paint may
contain lead, which is poisonous. Any pre-1960 building may have been painted in the past with paint
containing lead and covered with additional layers of paint. Once deposited on surfaces, hand to mouth
contact can result in the ingestion of lead. Exposure even to low levels of lead can cause irreversible dam-
age to the brain and nervous system. Young and unborn children are particularly vulnerable.
When removing paint, ensure that the work area is enclosed. Preferably wear a dust mask.
Do not burn the paint. Use the scraper provided and keep the nozzle at leaf 25 mm away from the painted
surface. When working in a vertical direction, work downwards to prevent paint from falling into the tool
and burning.
Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned after completing the
work.
7 ASSEMBLY AND ADJUSTMENT
Prior to assembly and adjustment always unplug the tool
The air temperature can be adjusted to suit a wide range of applications. The table below suggests settings
for dierent applications.
Setting Applications
I - Drying paint and varnish.
- Removing stickers.
- Waxing en de-waxing.
- Drying wet timber prior to lling.
- Shrinking PVC wrapping and insulation tubes.
- Thawing frozen pipes.
II - Welding plastics.
- Bending plastic pipes end sheets.
- Loosening rusted or tightly fastened nuts and bolts.
II - Removing paint and lacquer.
- Soldering plumbing joints.
71805 Manual.indd 4 31-12-10 15:20
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kinzo 71805 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kinzo 71805 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 4,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info