483666
3
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
3
A
4.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs and matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric
shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
4.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool when you are tired or under the inuence of drugs, alcohol or medication. A moment of inat-
tention when operating a power tool may result in serious personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid
safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the o position before inserting the plug. Carrying power
tools with your finger on the switch or plugging in power tools when the switch is in the on position
makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to
a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet rmly on the ground at all times. This will enable you retain control
over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from the
power tool. Loose clothes, jewellery or long hair can become entangled in the moving parts.
4.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do.
A power tool will achieve better results and be safer if used in the context for which it was designed.
Do not use the power tool if the switch cannot turn it on and o. A power tool with a broken switch is
dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people who are not fa-
miliar with the power tool or these instructions to operate it. Power tools are potentially dangerous in the
hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other feature that might
aect the operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents
are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions and the
work which needs to be done. Using a power tool in ways for which it was not intended can lead to poten-
tially hazardous situations.
4.5 Service
Your power tool should be serviced by a qualied specialist using only standard spare parts. This will ensure
that it meets the required safety standards.
71805 Manual.indd 3 31-12-10 15:20
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kinzo 71805 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kinzo 71805 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 4,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info