677867
73
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Owner’s Manual SD1
73
file has Lyrics events and they will be set in syllables on the display. From the words display page exit using the F10 func-
tion push button.
MODIFYING AND SAVING THE PARAMETERS OF THE TRACKS OF A MIDI FILE
The SD1 can modify the Volume, Reverb, Chorus and Pan parameters for each single track (Part) of a Midi file. It can also always filter undesired
MIDI events, transpose the track, enable the Mute and define the MIDI channel receiving and transmitting for each track. To go beyond the
General MIDI standard Level 1, it is also possible to convert the track into one dedicated to the use of a Drum Set or the Vocalizer. These param-
eters can be edited only after having started the Midi file for some beats, just enough to load the single track parameters that are always at
the beginning of each Midi file.
The SD1 is provided with two different editing methods: the first is based on displaying one track or Part at a time, the second shows the set-
ting of the single parameter for all sixteen parts.
Once the Midi file has been started for a few beats, press F1 GM Part to access the editing pages.
It is not necessary to continue reproducing the Midi file once the parameters have been loaded in the memory, however by modifying the param-
eters while the Midi file is reproducing it will be much easier to play back the result.
MODIFYING A SINGLE PART
Once a Midi file has been loaded, enable SONG PLAY and from the main page press F1 GM Part to call up the page dedicated to the parame-
ters of a single track of the Midi file. The Part is shown in the middle of the display, the parameters of which (that can be modified) are assigned
to the function push buttons. Right underneath is the timbre assigned to the Part and the effect used. The bottom part of the display is ded-
icated to monitoring the activities of the sixteen Parts, while playing the Midi file and can be useful to find the Part to be modified.
To move around between the single Parts use the PAGE +/- push buttons.
The parameters that can be modified must be selected using the dedicated function push button before the value can be modified.
Timbre: Each track can use a timbre taken from the Voice, User Voice and RAM/Flash bank. To modify the timbre assigned follow the normal
procedure using the VOICES, RAM/FLASH, USER VOICE, PAGE +/- push buttons and the function push buttons.
Modulation effect: For each single track you can choose the modulation effect to be applied to the timbre between Chorus, Distorsor and Delay,
using the CURSOR +/- push buttons. The effect entity can be programmed using F3 Chorus/Distorsor/Delay.
F1 Volume: This modifies the volume of the whole track. The value can be changed using the VALUE +/- push buttons which,
if pressed together at the same time, reset the value.
F2 Reverb: This modifies the Reverb entity applied to the track. The value can be changed using the VALUE +/- push but-
tons which, if pressed together at the same time, reset the value.
F3 Chorus/Distorsor/Delay: This modifies the entity of the modulation effect chosen between Chorus, Distorsor and Delay assigned to the
track using the CURSOR +/- push buttons. The value can be changed using the VALUE +/- push buttons which,
if pressed together at the same time, reset the value. The display shows the type of effect chosen next to F3
and also below the timbre.
F4 Panpot: This modifies the arrangement of the timbre on the stereo panorama. The value can be changed using the
VALUE +/- push buttons which, if pressed together at the same time, take the timbre back to the middle of the
stereo panorama.
F5 Filter
73

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ketron-SD1

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ketron SD1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ketron SD1 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ketron SD1

Ketron SD1 Gebruiksaanwijzing - Deutsch - 156 pagina's

Ketron SD1 Gebruiksaanwijzing - Français - 140 pagina's

Ketron SD1 Aanvulling / aanpassing - Alle talen - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info