677867
138
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Activate the MSP SAMPLER (the button LED will light up) on the main display page to load the audio file into the sampler.
Make sure that the MASTER FOLDER button is activated and press F1 Load to display the list of audio files stored in the Sound folder (no. 94).
Use the VALUE +/- buttons to select the audio file to be loaded and press the F2 Load button. When loading is completed, the SD1 goes back
to the initial Sampler page.
Activate the Sync mode by cyclically pressing the F7 Pitch button.
Use F8 Bar to enter the number of bars the audio loop consists of: The SD1 offers a number of options obtained from the analysis of the
audio file by pressing several times F8 Bar. The tempo value will be modified according to your choice.
Press SAVE/ENTER to save your settings: This displays a page where you can rename the file using the keys of the keyboard and the CUR-
SOR +/- buttons. Press F10 Exec to confirm the execution. If you maintain the same name, the SD1 asks you if you wish to overwrite the exi-
sting file pressing F10 Overw.
LOADING THE AUDIO LOOP INTO THE RAM
If you have processed the audio file with the sampler, this file is already loaded in the RAM and, as a matter of fact, the lighting LED on the
RAM/FLASH button informs that there are samples selected.
Otherwise, make sure that the MASTER FOLDER is activated, enter the DISK menu, press F5 Folder Choice and then select F4 Sound. From
the list displayed choose the audio file to be loaded into the RAM using the VALUE +/- and CURSOR +/- buttons, then select it with F10 Select
and execute the loading operation pressing F2 Load. Pressing the EXIT button you return to the main display page.
LOADING A MIDI FILE FROM THE FLOPPY DISK WHILE YOU ARE IN SONG PLAY
Introduce the floppy disk with the Midi file (.MID extension) previously processed with the notes to be assigned to the loop.
Press the special button on the control panel to activate SONG PLAY. The relevant led lights up.
Use the PAGE +/- buttons to select Floppy Disk.
Press function key F5 Dir to display the list of files.
On the display the first 20 of the stored Midi files is shown. Use the VALUE +/- buttons to display the next ones.
Enter the number of the Midi file to be loaded using the numeric keypad (STYLES buttons). The Display goes back to the initial page of the
Song Play menu.
As soon as the loading operation is completed, the name and the number of the Midi file appears on the display
LOADING A MIDI FILE FROM THE HARD DISK WHILE YOU ARE IN SONG PLAY
Use the PAGE +/- buttons to go to the hard disk without exiting from Song Play.
If the Hard Disk was already previously selected, on activating Song Play reference is made to a folder of the hard disk.
If Master Folder is activated, the reference folder is no. 91 Midi file.
Press function key F5 Dir to display the list of files.
On the display the first 20 of the stored Midi files is shown. Use the VALUE +/- buttons to display the next ones.
Enter the number of the Midi file to be loaded using the numeric keypad (STYLES buttons). The Display goes back to the initial page of the
Song Play menu.
ASSIGNING AN AUDIO LOOP TO A MIDI PART
After having loaded the modified Midi file, press F1 GM Part on the main Song play page. Use the PAGE +/- buttons to move among the single
parts. Select the part corresponding to the track created to control the sample, and then change the timbre selecting the desired audio loop
from the RAM/FLASH bank. On starting, synchronisation is automatically carried out.
The modified Midi file can be saved pressing SAVE/ENTER, which allows you to rename the Midi file using the keys of the keyboard and the
CURSOR +/- buttons. Press F10 Execute to confirm.
CALLING UP THE AUDIO FILE AND THE MIDI FILE
Replaying the Midi file with the correct audio loops requires previous creation of a Sound Block containing all the audio loops with the same
name as the Midi file. This means that on calling up the Midi file, also all the necessary audio loops are loaded. It is preferable to load the sam-
ples in a sound block on starting the SD1, keeping in mind that during the loading operation neither the keyboard nor the timbres of the SD1 can
be used.
OTHER AUDIO LOOP CONTROLS
Pressing the # button activates and deactivates the sample loop, also during the execution of the Midi file.
If in the RAM/FLASH bank there are other audio samples loaded with loops that have already been processed by the sampler for synchronisa-
tion, these can be called up in real time, one after the other, without the need to modify the timbre assignment to a part. For this purpose, press
the INTRO 1, INTRO 2, INTRO3, FILL 1, FILL 2, FILL 3, BREAK and TO END buttons while the Midi file is being executed. A maximum of eight
audio files can be performed in this way, to create real time re-mixing, like in a Dance.
Loop activation can be controlled by MIDI messages like Note On/Off on the same MIDI channel where the audio file is handled. The following
Sys-Ex expressed in hexadecimal values must be entered into the Midi file to obtain this type of control: F0, 26, 7B, 7C, 00, F7. This function is
most important if you wish to use One Shot type audio samples like choruses, guitar riffs or special effects. If you know the Program Change
SD1 Owner’s Manual
138
138

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ketron-SD1

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ketron SD1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ketron SD1 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ketron SD1

Ketron SD1 Gebruiksaanwijzing - Deutsch - 156 pagina's

Ketron SD1 Gebruiksaanwijzing - Français - 140 pagina's

Ketron SD1 Aanvulling / aanpassing - Alle talen - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info