686375
24
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
24
Robot Gun Cleaning Station© Kemppi Oy 2016 1616
OPERATING MANUAL
11. USING THE ROBOT GUN CLEANING
STATION
This section describes how to use the Robot Gun Cleaning
Station.
As the Robot Gun Cleaning Station is integrated into a
welding system, the operating instructions for the welding
components, such as the welding torch and robot control,
must be observed during operation.
Make sure that the Robot Gun Cleaning Station unit is
operated with the delivered protective device only.
Proceed as follows:
1. Switch on the robot control.
2. Start the welding process.
3. Stop the welding process.
12. WITHDRAWING THE ROBOT
GUN CLEANING STATION FROM
OPERATION
This section describes how to remove the Robot Gun
Cleaning Station from service.
As the Robot Gun Cleaning Station is integrated into a
welding system, the details of its withdrawal from operation
depend on the robot control. Please make sure that the
shutdown procedures for all components integrated into
the welding system are strictly observed.
1. Proceed as follows: Switch o the robot control.
13. MAINTENANCE AND CLEANING
Scheduled maintenance and cleaning are prerequisites for
a long service life and trouble-free operation.
Once a month, thoroughly clean the robot mount to
remove all dirt and welding spatter.
Risk of injury due to unexpected start-up
For the entire duration of maintenance, servicing,
unmounting, and repair work, the following instructions
must be adhered to:
Switch o the power supply.
Cut o the compressed air supply.
Pull the power plug.
Electric shock
Dangerous voltage can be produced because of defective
cables.
Check all live cables and connections for proper
installation.
Replace any parts that have suered damage,
deformation, or wear.
The maintenance intervals listed are recommended
values and assume single-shift operation.
Maintenance and cleaning work may only be
carried out by qualied and trained specialists.
Always wear your personal protective clothing
when performing maintenance and cleaning
work.
When replacing the liquid-cooled A7 MIG Gun
500-w hose assemblies, make sure that any
coolant residues are removed from the robot
mount.
The maintenance intervals listed are
recommended values and assume single-shift
operation.
The Robot Gun Cleaning Station unit is virtually
maintenance-free. However, regularly cleaning and
evaluating the mechanical parts that experience stress is
necessary in order to maintain its value and to guarantee
its full ability to function.
13.1 Weekly maintenance
1. Check the condition of the milling cutter.
2. Clean the clamping unit.
3. Cleaning of the injection unit.
4. Unmount the cover of the injection unit (1) and the
thrust ring (3), and check the rubber gasket (1). See
Section 8.2.
5. Empty the waste container for wire rests.
13.2 Monthly cleaning
Clean the storage tank of the injection unit if it is
very dirty.
We recommend a monthly basic cleaning.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kemppi Robot Gun Cleaning Station bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kemppi Robot Gun Cleaning Station in de taal/talen: Engels als bijlage per email.

De handleiding is 2,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info