520196
19
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
35
H.1. Setting Ringer Volume & Ringer Type
Ringer Volume
Key Map:
Audio Setting Ringer Volume
select the volume
1. To arrive at this menu, push in standby mode, and
use / to start browsing until ”Audio Setting”
is shown on the screen. Press
2. Press / to select ”Ringer Volume” and press
3. Press / to select the volume you want. (you
will hear a sample of each as you scroll through), then
press to confirm.
4. Press
to exit and return to standby. If you select
Volume ”Off”, will be displayed.
Ringer Type
Key Map:
Audio Setting Ringer Type
select the option select the ringer type
1. To arrive at this menu, push in standby mode, and
use / to start browsing until ”Audio Setting”
is shown on the screen. Press
2. Press / to select ”Ringer Type” and press
3. Press / to select the ”External”, ”Internal”,
”Paging”, ”Alarm”, or ”Appointment” and press to
confirm.
4. Press
/ to select the melody you want. (you
will hear a sample of each as you scroll through), then
press to confirm your selection.
5. Press
to exit and return to standby.
H.2. Appointment
Key Map:
Time & Alarm Set Appointm. – Select
your appointment
The date and time must be set before you can access the
Calendar menu option. To set date and time, see section
D.3. Setting date/time
. Your phone allows you to set five
personalized date and time appointments.
1. Press
to access the main menu.
2. Press
/ to select ”Time & Alarm”. Press
3. Press / to select ”Set Appointm.”. Press
4. Press /
to select one from ”Appointment 1”
to ”Appointment 5”. Press
5. Press
/ to select ”On”. Press
6. Enter date and time for the appointment. Refer to D.3.
Setting date/time. Press
7. Enter the appointment name using the keypad (up to 13
characters). Press
I. ADVANCED OPERATION
Special Attention!!
The following sections are only for users who are familiar
with electronics products. Failure in following steps correctly
may stop your DECT phone from normal operation.
I.1. To register a cordless handset
When you register a cordless handset to your base, you will
be asked to enter your base PIN code. To enable registration
mode on the base unit, press and hold the PAGE button for
five seconds. The LED on the base will flash one time when
registration mode is enabled. Before registration, make sure
the new handset is fully charged and that you have the base
and the handset in front of you. Also, make sure that all
handsets and the base are in standby.
On the handset you want to register:
Key Map:
Add. Settings Register select
the base number
1. Press to access the main menu.
2. Press
/ to select ”Add. Settings” and press
3. Press / to display ”Register” and press
to confirm.
4. Press
/ to select your base number and press
to confirm.
If the base already has the maximum number of six handsets
registered, you will need to deregister one of the existing
handsets before you can register the new handset. See
section I.2. Deregister a handset or a base.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Jacob-Jensen-50-DECT

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jacob Jensen 50 DECT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jacob Jensen 50 DECT in de taal/talen: Engels als bijlage per email.

De handleiding is 2,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info