554920
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
UC-6007/6014 receiver 2/2 MJQ51102
Indicators on the front housing of the receiver indicate the status of the
output channels
LEDs 1 to 7(14) Meaning
Off Channel is not used (no transmitter is enrolled)
Steady Green Channel has a transmitter enrolled, relay is off
Steady Red Relay is on (activated by the enrolled transmitter)
Flashing Green Communication with the enrolled transmitter is down
(Low battery in transmitter, radio interference etc.)
Flashing Red Enrollment mode (to enroll a transmitter)
Flashing Red
(rapidly)
Output is overloaded or short-circuited.
Control channel MODE
The receiver has a special control channel MODE to which a control
panel type JA-6x (PgX output) or RC-4x remote controls can be enrolled.
This channel can be used for remotely controlling the mode in which the
outputs will work.
If no transmitter is enrolled to the MODE channel, then outputs 1-7(14)
react in a normal way to signals from their corresponding thermostats.
If the control panel is enrolled and the PgX output is activated (indicator
MODE lit red) outputs 1-7(14) react in a normal way to signals from their
corresponding thermostats.
If the PgX output is deactivated (indicator MODE lit green), then outputs
1-7(14) ignore signals from thermostats. They only react to anti-frost
signals from a thermostat supporting this feature (e.g. TP-31).
Indicator MODE
Off Channel is not used - no transmitter is enrolled
(
receiver reacts to standard signals from thermostats)
S
teady Green Transmitter is enrolled – channel MODE is
d
eactivated, outputs 1-7(14) only react to the anti-frost
s
ignals from thermostats
S
teady Red
T
ransmitter is enrolled – channel MODE is activated,
o
utputs 1-7(14) react to standard signals from
t
hermostats
lashing Green Communication with the enrolled transmitter is down
(
Low battery in transmitter, radio interference etc.)
Use and Maintenance
All enrolled transmitters (thermostats and detectors) transmit regular
check signals. If the receiver does not receive the signal of an enrolled
transmitter for a certain period, it will indicate that communication with this
item is down (flashing green LED) and the corresponding output will turn off
.
One reason for the lost connection can be low batteries in the transmitter.
The average lifetime of a transmitter's batteries is about 1 year. Each
transmitter checks its battery conditions and signals in advance if the
batteries are reaching a critically low state (see the transmitter manual for
details).
Another reason for possible connection failure can be radio signal
interference in the operational band of the receiver. In such a case the
receiver will usually indicate loss of communication with a multiple
number of transmitters. In this situation, check if there is any non-
approved or faulty radio-communicating device within the range of the
receiver.
Outputs which have not been activated for 7 days will switch on for
5 minutes to protect connected devices, especially pumps which can be
damaged if they are not used for a long time.
Warning: the manufacturer is not responsible for any damage caused
by improper installation or any non-suitable use of this product.
Specification
Power supply: 230 V AC, 50Hz, protection class II
Consumption: 0.02 A stand-by; 0.2 A max.
Max. relay output load: 10 A / 230V
Voltage of outputs 1-7(14) and COM: 24V DC
Max. load of outputs 1-7(14): max. 0.4 A per single output and 1.7A
total for all outputs
Radio frequency: 433.9 MHz
Working range with JA-60 100 m (open area)
Working range with RC 30 m (open area)
Dimensions: 258 x 214 x 77 mm
Radio characteristics: ETSI EN 300220
EMC: EN 50130-4, EN 55022
Safety: EN 60950
Working temperature: -10 to +40
o
C
Can be operated according to ERC REC 70-03
Jablotron Ltd. hereby declares that the UC-6007/6014 is in
compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC. The original of the conformity assessment can be
found on website www.jablotron.com
-Technical support section.
Note: Although this product does not contain any harmful
materials we suggest you return the product to the dealer or
directly to the producer after use.
Dimensions
Internet: www.jablotron.cz
Tel.: +420 483 559 999
fax: +420 483 559 993
Pod Skalkou 33
466 01 Jablonec nad Nisou
Czech Republic
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron UC-6007 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron UC-6007 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info