554927
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Contactless access control system RP-01 2/2 VAB50202
2.4. Master position – programming and deleting
The master position has got a privileged status – reprogramming
causes deleting all PITs learned so far!!
Master position programming:
Access the learning mode. With SEL button select „position+100“ and
by pressing the SET button repeatedly select position 9xx. Press the
SET button once again and get „MASTER LEARNING“ programming
mode. Place a PIT chip and program or reprogram the master.
Master position´s content deleting:
Access the learning mode. With SEL button select „position+100“ and
by pressing the SET button repeatedly select position 9xx. Press the
SET button once again and get „MASTER LEARNING“ programming
mode. With the SEL button select „DELETE ?“ position and confirm
with SET button. This is the way to delete the content of the master
position.
In case there is no PIT programmed on the master position, just press
and hold the MOD button to access the learning mode.
2.5 Relay tie timing
To set use the MOD button. Sign „(INSERT CARD)“ displays on the
LCD when the MOD button is pressed for at least 2s. Choose the
RELAY time“ (on the LCD bottom row) by pressing the SEL button
repeatedly. Setting is made by SET button. Interval is per second 1-9s.
Confirm your choice with MOD button. To exit learning mode press and
hold MOD button. Device will go into standby mode.
2.6. Relay´s switching mode setting
Device can be set into a switching mode where every change of output
relay status is conditional on placing programmed PIT.
To set use the MOD button. Sign „(INSERT CARD)“ displays on the
LCD when the MOD button is pressed for at least 2s. Choose the
RELAY time“ (on the LCD bottom row) by pressing the SEL button
repeatedly. Setting is made with SET button when 0s value is chosen.
Confirm your choice with MOD button.To exit learning mode press and
hold MOD button. Device will go into standby mode.
Československé armády 4344
Jablonec nad Nisou
PSČ: 46601
Tel: 483 515 515 fax: 483 515 550
E-mail: jablopcb@jablopcb.cz
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron RP-01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron RP-01 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info