554894
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
JA-60WEB communicator -2 - MHO51104
2 Local network configuration
Within an Ethernet network (LAN, intranet, internet) every device is identified by an IP address (e.g.
192.168.250.20). The address can be either public or private (for example computers in a company
network have public IP addresses and a home computer with a connection to the internet via a web
provider has private IP address).
Before connecting the Ethernet cable the IP address must be set (manually or automatically) so as
not to be in collision with other computers in the network.
2.1 Manual setting of the IP address
Using a system keypad set a suitable IP address as given by a network supervisor. DHCP
(automatic assignment of IP addresses) must be disabled, see 3.1.
2.2 Automatically setting the IP address
Give your network supervisor the communicator’s MAC address which can be found on the label on
the bottom part of the communicator or on the package box. The supervisor will provide you with an
automatically assigned IP address. DHCP must be enabled (see 3.1.).
3 Communicator configuration
Communicator configuration can be done via the system keypad (the control panel must be in
programming mode). To exit programming mode, press the N key. The following settings should be
done in consultation with the network provider / supervisor. Default settings and backup can also be
made by Locator software, which can be found on www.jablotron.com.
3.1 Automatic assignment of IP address (DHCP)
Before attaching the communicator to the LAN network, it is necessary to determine the assignment
of IP address. If DHCP is disabled it is necessary to set parameters according to sequences 3.2, 3.3
and 3.4.
940 DHCP - automatic assignment of IP address disabled
941 DHCP - automatic assignment of IP address enabled
Factory default: 941 – automatic assignment of IP address is enabled
3.2 IP address setting
If DHCP is disabled, set the IP address by sequence:
91 xxx xxx xxx xxx
where: xxx xxx xxx xxx is the IP address
NOTE: if some of digits are not used in the IP address, they must be substituted by zeros (see example)
Example: to set the IP address 192.168.1.23 enter 91 192 168 001 023
Factory default setting: IP address 192.168.1.253
3.3 Netmask setting
If DHCP is disabled, set the subnet mask by sequence:
92 xxx xxx xxx xxx
where: xxx xxx xxx xxx is the netmask address
Example: to set Net mask 255.255.255.1 enter 92 255 255 255 001
Factory default setting: address 255.255.255.0
JA-60WEB communicator -3 - MHO51104
3.4 Gateway IP address setting
If DHCP is disabled, set the gateway IP address by sequence:
93 xxx xxx xxx xxx
where: xxx xxx xxx xxx is the IP address
Example: to set Gateway IP address 192.168.33.1 enter 93 192 168 033 001
Factory default setting: Gateway IP address 192.168.1.1
3.5 Reset to default setting
Entering 96060 will cause a return to the factory default settings, see 6 (the IP address and all unsent
data will be erased).
4 Web server remote access
All parameters of the JA-60WEB communicator can be set via an internet browser. Full support is
possible using MS Internet Explorer version 6 or higher. Setting can be done locally as well as from an
outside network (if it is enabled – please consult the network provider / supervisor).
4.1 Access to the web server
After setting has been done according to section 3 , enter the IP address of the communicator into
your web browser (for example: http://192.168.1.23), the login dialog will appear.
Factory default setting:
Name: jablotron
Password: jablotron
Note: The name and password can be customized (see 4.1.3)
By clicking on the reset button which can be found on the most pages, you will reset the
settings to their original values.
4.1.1 Panel
In the panel page the user can:
Monitor the control panel
Operate Hot keys for controlling the control panel quickly
Enter programming or operating sequences in the Sequence input field
See the status and operate the outputs (AUX1-AUX3) and see the status of the input (INP)
4.1.2 Events
To see the 127 latest events
4.1.3 Communicator
In the communicator page the user can:
Configure the network settings such as DHCP, IP address, Netmask and gateway
Set the Idle time for auto logoff, and HTTP port
Set the Function of the input (off - the status of the input will be only shown in the Panel
Page, tamper – when connected to GND, the control panel will trigger the tamper alarm)
Customize Login Name and Password
4.1.4 Control panel
This page is accessible only when the control panel is in programming mode (P). It enables full
setting of the control panel. A detailed description of the parameters can be found in the control
panel manual.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-60WEB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-60WEB in de taal/talen: Engels als bijlage per email.

De handleiding is 0,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info