554883
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
GD-06 ALLEGRO GSM dealer 2/2 MHG51302
3.3. Customization of SMS texts and access
codes
The default texts of reporting SMS and incoming SMS
instruction can be modified using the following programming
SMS:
MASTER TXT index, text
index index number according to the following
table
text new text, which will be used in SMS
messages
Basic SMS reports’ texts
Index Default Description
10 P1 Description of P1 input terminal
11 On P1 input terminal is triggered
20 P2 Description of P2 input terminal
21 On P2 input terminal is triggered
30 P3 Description of P3 input terminal
31 On P3 input terminal is triggered
40 P4 Description of P4 input terminal
41 On P4 input terminal is triggered
Basic SMS instructions’ texts
Index Default Description
50 P5 Description of P5 output terminal
60 P6 Description of P6 output terminal
70 RELAY Description of the relay output
100 ON Instruction to switch on an output
101 OFF Instruction to switch off an output
109 USER User access code
110 MASTER Master access code
You can send multiple texts separated by commas and blank
spaces in one programming SMS.
Examples:
a) “MASTER TXT 10, Security system, 11, armed” will
customize the input P1 setting to indicate a security
system’s status. If a corresponding alarm system
output triggers the P1 when arming, then SMS
report “Security system armed” is sent.
b) “MASTER TXT 71, Heating” will modify the remote
SMS instruction to switch on a heating system
connected with the relay output to “Heating on”.
c) “MASTER TXT 110, Big elephant” will change the
master access code to “Big elephant”
4. Operation
After installation of the GD-06 ALLEGRO and programming
of the telephone numbers, the GD-06 is ready for operation.
Triggering of any input P1 to P4 will cause the sending
of a SMS report to the telephones registered in the
positions TEL1 to TEL6.
From a GSM phone, you can send an SMS instruction
to switch on or off the P5 and P6 outputs.
You can also switch the relay on or off by making a
phone call to the GD-06 from a phone registered to
TEL1 or TEL2 memory positions. The GD-06 ALLEGRO
doesn’t answer this call, so you don’t pay any
telecommunication fee for this remote control.
Notes:
1. You can remotely control the GD-06 from any phone:
not only from the ones stored in the memory TEL1-
TEL6. You just have to add the master (default
MASTER) or user (default USER) access code in front
of the instruction.
Example: “MASTER ON P5”
2. The SMS instructions texts are case insensitive. It
means that instruction “ON P5” is equal to “on p5”.
5. Advanced programming
More detailed programming can be accomplished from
Internet using the web page www.gsmlink.cz
. Follow the
product registration instructions to get access to a secure
web page. Use the registration code printed on the warranty
certificate (the code has a form xxxx-xxxxx-xxxx and it is
unique for each system). From the GSMLink, you can
program your GD-06 ALLEGRO easily regardless of where
in the world you are located. The best performance will be
obtained if your SIM card enables GPRS data transmission.
Form the GSMLink server you can:
Check the current status of all inputs and outputs
Control the outputs
Program the GD-06
Change the SMS tetxts (only when GPRS data
connection is enabled)
If you don’t have Internet access, you can also use SMS for
the advanced programming. You can find all details in the
Expert programming manual.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron GD-06 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron GD-06 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron GD-06

Jablotron GD-06 Gebruiksaanwijzing - English - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info