28356
102
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
101
Section 3 Operation
MAGNETIC CORR. (Correcting the magnetic compass)
•In this menu, you can set a correction value for the magnetic variation
automatically (AUTO) or manually (MANUAL). The readout of the
bearing will be the sum of the input bearing data and the correction
value. You can select AUTO or MANUAL for setting the correction
value. For example, enter E7.0° as the correction value when the
magnetic variation currently listed in the marine chart is W7.0°. The
correction range from 0.0 to W99.9° or E99.9°, and you can set it in
increments of 0.1°. To disable correction, select MANUAL and set the
correction value to 0.0°.
Note:
•A magnetic variation value set with AUTO is a rough value calculated
based on the current date and time, and the ships current position. You
cannot set it with AUTO if the data of the current date & time and the
current ships position is not stored. When it is necessary to set a more
precise value or when the abovementioned data is not stored, set it with
MANUAL.
RESET LOG (Resetting the trip log)
•In this menu, you can reset the LOG value to “0”. The LOG is the
sum of the navigated distances and displayed at the top of the screen
in the NAVIGATION mode. The value of the LOG is maintained
after the RADAR 1800 is turned OFF.
OPERATION
•This menu is used to set the Joystick mode, the CENTER soft key
mode, and operation guides appears or disappears.
J-STICK PUSH
•Set the joystick mode. By selecting MARK, the joystick is set as
MARK (EVENT MARK) input mode. By selecting WAYPOINT, the
WAYPOINT (EVENT WAYPOINT) input mode is set.
CENTERING
•When centering the chart screen, select the center standard.
By selecting VESSEL, the middle of the boat is used for centering; by
selecting CURSOR, the cursor is used for centering.
GUIDE
•By selecting ON, the operation guides display at many functions; by
selecting OFF, the guides not display.
OPERATION
WAYPOINT
VESSEL
ON
J-STICK PUSH
CENTERING
GUIDE
J-STICK PUSH
MARK
WAYPOINT
CENTERING
VESSEL
CURSOR
GUIDE
OFF ON
102

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JRC Radar1800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JRC Radar1800 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info