28356
100
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
99
Section 3 Operation
DEPTH IN (Selecting depth data input)
•In this menu, you can select the depth data input from the external
NMEA source or OFF. When NMEA is selected, the depth data input
from the external depth gauge is displayed.
Note:
•When you input the depth data from an external water temperature
gauge, you need to connect the specified signal line to the NMEA
connector on the rear panel. In addition, be sure to check that the
NMEA0183 sentences of $xxDPT or $xxDBT are output from the
connected water depth gauge. (You can check this easily using the self test
mode of the RADAR 1800.)
COURSE IN (Selecting course data input)
•In this menu, you can select the vessel’s course data input from GPS,
GPS compass, or magnetic compass. When GPS is selected, the
course data is inputted from GPS.
Notes:
•When you select input source to GPS and you use an external NMEA
source (select NMEA at POSITION IN menu), you need to connect the
specified signal line to the NMEA connector on the rear panel. In
addition, be sure to check that the NMEA0183 sentences of $xxHDT,
$xxHDG, $xxRMC, or $xxVTG are output from the connected GPS.
(You can check this using the self test mode.)
•When you select input source to GPS COMPASS, you need to connect the
specified signal line to the DC12V/COMPASS connector on the rear
panel. In addition, be sure to check that the NMEA0183 sentences of
$xxHDT is output from the connected GPS compass. (You cannot check
this using the self test mode.)
•When you select input source to MAG, you need to connect the specified
signal line to the DC12V/COMPASS connector on the rear panel. In
addition, be sure to check that the NMEA0183 sentences of $xxHDT,
$xxHDG, $xxHDM, or $xxVHW are output from the magnetic compass.
(You cannot check this using the self test mode.)
POSITION IN (Selecting position input)
•In this menu, you can set the source of the navigation information
data such as position, course, geodetic information, etc. The RADAR
1800 provides the GPS/DGPS connector which allows a direct
connection of the DGPS212 or GPS112, and the NMEA connector
to input the NMEA0183 formatted navigational information data
from the external navigation aids. The navigational information input
from the connector selected in this item is displayed on the screen.
When GPS is selected, the navigational information input from the
GPS112 or DGPS212 connected to the GPS/DGPS connector on the
rear panel is displayed. When NMEA is selected, the navigational
information input from the external navigation aids is displayed.
100

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JRC Radar1800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JRC Radar1800 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info