28344
63
Verklein
Vergroot
Pagina terug
1/404
Pagina verder
2-3
2
[POWER] (Power Supply) Switch
This switch is used to turn the power on and off. The lamp lights when this switch is on.
When the power is on and it cannot be turned off for some reason, depressing this switch for five
seconds will force the power off.
[PWR ACK] (Power Alarm Acknowledgment) Switch
When this switch is set to ON, the lamp lights to start the system.
In order for this key to work, an external battery is required (normally a power supply separate
from the AC unit).
[TX/STBY] (Operation) Switch
TheSTANDBY will appear at the upper left of the radar display about 3 minutes after
the [PWR] switch is set to ON. Then, press this switch, and transmission will be started.
Pressing the switch during transmission sets the equipment to the standby state.
[ALARM ACK] (Alarm Acknowledgment) Switch
Press this switch to acknowledge a failure, approach of a target, or collision alarm.
[TUNE] (Turning) Control
Tunes the target signals to display the targets most clearly on the radar display.
Switching between AUTO and MANUAL can be done by pressing the knob.
[RAIN] (Rain/Snow Clutter Suppression) Control
Reduces the clutter echo caused by rain and snow.
Be careful not to set this adjustment too high. Setting this adjustment too high may cause the
target to be erased. Switching between AUTO and MANUAL can be done by pressing the knob.
[SEA] (Sea Clutter Suppression) Control
Reduces the clutter echo caused by the surface of the sea.
Be careful not to set this adjustment too high. Setting this adjustment too high may cause the
target to be erased. Switching between AUTO and MANUAL can be done by pressing the knob.
[GAIN] (Receiving Sensitivity) Control
Controls the radar receiving sensitivity.
Adjust the GAIN to a point where the background static does not interfere with operation.
[RANGE +/-] (Range Scale Select) Switch
Selects a range scale from 0.125 to 96 (or 120) nautical miles.
[EBL1] (Electric Bearing Line 1) Switch
Selects and displays EBL1. Switches between ON and OFF, and the function for which this
switch if valid. When depressed for two seconds or longer, this switch selects ON/OFF for the
floating setting.
[EBL2] (Electric Bearing Line 2) Switch
Selects and displays EBL2. Switches between ON and OFF, and the function for which this
switch if valid. When depressed for two seconds or longer, this switch selects ON/OFF for the
floating setting.
[EBL] (Electric Bearing Line) Control
Rotates the bearing of the EBL that is selected by EBL1 and 2.
[VRM1] (Variable Range Marker 1) Switch
63

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JRC JMA9923_7XA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JRC JMA9923_7XA in de taal/talen: Engels als bijlage per email.

De handleiding is 7,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info