578951
7
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
5.2 THERMOMETER WITH ALARM
With regard to operation, the HT78 is in a 'sleep mode’ when no key is pressed for more than 2 minutes. This status is then
recognised by the fact that on the left-hand side of the display neither the
symbol nor the number in the channel display is
flashing. In such a case, the operation is activated by pressing one of the 3 keys. The corresponding symbol then flashes in the
field to be operated (
or ‘CH’ with corresponding number).
The HT78 measures the temperature directly and also receives the measurements of up to a maximum of 5 IROX thermo radio
sensors. Each sensor can be set to one of the channels 1-5 (resp. 1-3 for 3-channel appliances). In the two information windows
(radio sensors CH1....5 and
) the temperature currently measured is displayed in °C (or °F).
The following operations can be made in this function:
5.2.1 Reading of the temperature from each channel
Activate the CHANNEL key briefly to jump from channel to channel. The next channel is displayed with each press of the button
and activated for other operations.
The sequence of the activation is --> CH1 ---> CH2 --> CH3 --> CH4 --> CH5 --> --> CH1 --> etc
This is independent of whether a radio sensor is available in the system or not.
Note: The
measurement is always depicted in the lower window; the channels 1-5 one after the other in the middle window.
5.2.2 MIN/MAX memory
a) With the ‘MEMORY’ key you can read the Max/Min memory of the active channel by pressing it briefly (flashing symbol
or CH1 .... CH5). The corresponding MIN/MAX value is displayed together with the date and the time of the recording (‘time
stamp'). Each value will appear for approx. 4 seconds in the following sequence on the display:
- Maximum (=highest) temperature ‘MAX’
- Minimum (=lowest) temperature ‘MIN’
- Back to display of the current measurement
The sequence can also be made manually by pressing the MEMORY key.
All values shown have been recorded since the last memory reset. If no data are available, lines appear.
b) Reset of the MIN/MAX memory
If you hold the CLEAR key pressed for approx. 3 seconds, the MIN/MAX memory values of the active channel (flashing
symbol
or CH1 .... CH5) are reset to the current value. The recordings of the other channels remain.
5.2.3 Measurement unit °C or °F
You can change the unit of temperature from °C to ° F (see Chapter 2.2). The setting on the display appliance or the sensor is
to be made independent of one another and only affects the display of the corresponding device.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Irox HT78 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Irox HT78 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Irox HT78

Irox HT78 Gebruiksaanwijzing - Deutsch - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info