578951
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
3. PUTTING INTO OPERATION
1. Put all radio sensors that you want to use into operation and place these in close proximity (1-2 metres) to the reception
device.
2. Open the battery compartment of the display device and remove all insulation strips. If no batteries are in the device, insert
the 2 batteries (UM-3 or ‘AA’ 1.5 V) in the correct polarity.
3. Now close the battery compartment.
4. Directly after the activation of the batteries, all segments are displayed for a few seconds on the display. The HT78 then
begins with the time at 0:00 and 1.1.08 and the search of available sensors on all 5 channels.
5. Now set the time and the date and reset all Min/Max memories with the CLEAR key. This guarantees that you will be able
to read the valid MIN/MAX recordings with a valid time/date.
6. As soon as the sensor is displayed correctly (see ‘Reception status’ in Chap., 4), you can set up the sensor in the place
where you want to effectively measure the outdoor temperature. Under the most ideal conditions, this can be up to 30 m
away. In reality, however, this is often less. In the event of problems, try out other places, and do so both for the sensor and
for the display device.
The radio sensor is weatherproof. Nevertheless, please place the sensor where possible in the dry and at any rate in the
shade.
4. RADIO THERMOMETER
The operation of the radio sensor supplied is described in the instructions which are delivered separately.
Other Irox radio sensors that are compatible with the HT78:
3 channels (can be used on the channels, 1, 2 or 3) : HTS12C, HTS33, HTS13, HTC13*
5 channels (can be used on all 5 channels) : HTS55
(*HTC13 is included in the scope of delivery of the HT78 and can be used on the channels 1-3)
With the sensors with thermo and hygrometer, simply only the temperature is displayed on the HT78.
Reception status display
The wave symbol indicates the status of the signal reception of the channel displayed.
Start search process for a sensor
Select the desired radio channel with the CHANNEL key.
Example: Channel 4 (the number 4 is flashing)
Now press and hold the SEARCH key until the wave symbol starts to flash. The device now searches for the sensor on
channel no. 4. This process can take a few minutes and is finished as soon as the wave symbol stops flashing.
We have deliberately ensured that the search channel can be individually called up per channel so that sensors that are
already logged in are not affected by subsequent enhancements.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Irox HT78 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Irox HT78 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Irox HT78

Irox HT78 Gebruiksaanwijzing - Deutsch - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info