3. Switch ‘Return to time’ on the underside
ON: If no manipulation to the device is made after selection of a display mode with the
rocker-switch contact, the display automatically changes back to the time display.
OFF: The display always stays in the last mode displayed.
4. Keys on the underside
M – same function as the display rocker-switch contact
S – pressed briefly: To change the display in the corresponding display mode
or to activate a function
– pressed for a long time (approx. 2-3 seconds): To make a setting in the
corresponding display mode (the segment to be set flashes in each case in the
display)
▲/▼ – In the setting mode, the two keys are used to change the value to be set. In the
normal device status, i.e. not in the setting mode, one of the 8 melodies can thus
be selected.
──> Details about the keys can be found in the corresponding function description
4- TIME SETTING (in the display mode TIME)
1. Press the ‘S’ key briefly on the underside of the device in order to select the 12/24-hour
display format.
2. Press the ‘S’ key for 3 seconds.
- The flashing hours number can be set with the upwards ‘▲’ or downwards
‘▼’ key.
- Press the ‘S’ key. The flashing minutes number can be set with the upwards ‘▲’ or
downwards ‘▼’ key.
- Press the ‘S’ key again to confirm the time set.
You can activate the rundown by holding the ‘▲’ or ‘▼’ key.
5- DATE SETTING (in the display mode DATE)
Press and hold the ‘S’ key for approx. 2-3 seconds.
- The flashing years number can be set with the upwards ‘▲’ or downwards ‘▼’ key.
- Press the ‘S’ key briefly. The flashing month can be set with the upwards ‘▲’ or
downwards ‘▼’ key.
- Press the ‘S’ key briefly. The flashing day can be set with the upwards ‘▲’ or
downwards ‘▼’ key.
- The weekday is set automatically via the calendar
- Press the ‘S’ key again to confirm the date set and to exit the setting mode.
