1- DEVICE FUNCTIONS
• ALTERNATING DISPLAY OF TIME (12- or 24-HOURFORMAT), TEMPERATURE (°C
OR °F) AND DATE (YEAR 2000-2099)
• WAKE-UP TIME
• COUNTDOWN TIMER (MAX. SETTING 180 MIN, 59 SEC)
• ALTERNATING DISPLAY BACKGROUND COLOURS
• 9 SELECTABLE WAKE-UP SOUNDS (eight melodies plus conventional ‘beep’)
2- PUTTING INTO OPERATION
INSERTION OF THE BATTERIES
Please remove the battery compartment cover, insert the 3 ‘AAA’ batteries supplied with
the device, ensuring correct polarity, and put the battery compartment cover back on. After
inserting the batteries, a full-segment display will briefly appear. 12.00 will then appear in
the display and a short series of sounds will be heard.
Should this not be the case, please reinsert the batteries again and activate the RESET
contact at the bottom of the device with a sharp object (e.g. a paper clip). If this does not
help, please check that the batteries are fully charged.
3- OPERATION
1. Switch ‘backlight’ on the underside (function of display lighting)
OFF: The display lighting is permanently switched off
ON: The display lighting is always switched on
Note: This mode requires a lot of electricity. The batteries will last a maximum of one
day. We therefore recommend that this mode of operation for the light is really only
used by you in specific and exceptional cases.
TR: Every time the display is touched lightly, the display lighting is switched on for
approx. 6 seconds.
2. Rocker-switch contact of the display
The display (LCD) is mounted in the device via a rocker-switch contact that you can also
activate by lightly pushing the display backwards. With each touch, the display mode
changes to the following sequence:
┌→TIME →TEMPERATURE →DATE → AL (Alarm) → TIMER ──┐
└─────────────────────────────────────────────────┘
- The ‘M’ key on the underside has the same function when pressed briefly.
- With the rocker-switch contact, a setting can be cancelled at any time. Any settings made
are adopted.
Note: In the backlight mode ‘TR’ the display lighting is switched on the first time the
appliance is touched lightly. In the approx. 6 seconds during which the display lighting is
active, you can scroll through in display mode with each touch as described above.
