521900
4
Verklein
Vergroot
Pagina terug
1/59
Pagina verder
6 7
3. Status Icon
3.1 ARM Mode
In ARM Mode, the Smart Panel‘s alarm will sound and the red LED will ash when the system is
triggered.
3.2 ALERT Mode
In ALERT Mode, the Smart Panel‘s chime will sound and the green LED will ash when a visitor is
detected.
3.3 HOME Mode
In HOME Mode, the system can operate in both the ARM and ALERT modes in different zones.
The system comes with default settings that allow the system to operate directly after opening the
package, but the settings can be adjusted to suit individual requirements.
4. Setting your PIN
To program your new 4-digit PIN
Make sure that you are in Standby Mode before taking any further steps.
To make sure you are in Standby Mode:
Enter default PIN of then press . The ‘ ’ symbol on the display will then disappear.
Step 1: Enter factory default PIN of again then press . The ‘ ’ symbol on the display
will then disappear.
Step 2: Press then
to set new PIN.
Step 3: Enter your new 4-digit PIN then
.
Step 4: Re-enter your 4-digit PIN plus to conrm.
5. Enrolling the Remote Control
Note:
Before the key fob remote control supplied with the system is able to work it rst needs to be
enrolled (added onto the system) as follows:
Make sure that you are in Standby Mode before taking any further steps.
Step 1: Enter your 4-digit PIN (or default PIN of ) then press . The ‘ ’ symbol on the
display will then disappear.
Step 2: Press
then
to enter Remote Control Enrol mode.
Step 3: Then press any key on the Remote Control to enrol it onto the system.
Step 4: Press
to complete the enrolment.
9 V battery
6. Operating the ARM mode
Make sure that you are in Standby Mode before taking any further steps.
6.1 ARM the Alarm System
- Smart Panel
Enter your 4-digit PIN (or default PIN of
) followed by then press to activate the
ARM Mode.
- Remote Control
Press button
on the remote control to activate the ARM mode.
The default exit delay is 15 seconds, with a visual countdown, before the system is armed.
6.2 Disarming the Alarm System
Enter your 4-digit PIN (or default PIN of
) followed by to disarm the system.
- Remote Control
Press button
on the remote control to leave the mode.
The default entry delay time is 30 seconds, with a visual countdown, before the siren is activated.
7. Operating the ALERT Mode
Make sure that you are in Standby mode before taking any further steps.
7.1 Go into ALERT Mode
- Smart Panel
Enter your 4-digit PIN (or default PIN of
) followed by
then press
to activate
Alert Mode.
- Remote Control
Press
button on the remote control to activate the mode.
7.2 Exit ALERT mode
Enter your 4-digit PIN (or default PIN of ) followed by
to exit Alert Mode.
- Remote Control
Press
button on the remote control to leave the mode.
8. Muting the Audible Countdown
When the Smart Panel is armed the audible countdown (beeper) can be silenced by pressing the
MUTE button, during the countdown. To reactivate the audible countdown (beeper) the MUTE button
should be pressed again.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw I-onik WS-100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van I-onik WS-100 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 3,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info