613684
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Copyright©Honeywell
50029833-004 A
HOT WATER HEATING
GUIDE TO THE USE OF THE ST9400S PROGRAMMER:
The purpose of the Programmer is to control the times when the heating and hot water can be switched on.
MODE buttons Slider
Normal Use:
Lift the flap to make sure the Slider is in the RUN position.
Also make sure that both hot water and heating are operating in AUTO or
ONCE mode, by pressing the MODE buttons repeatedly until the display
shows AUTO or ONCE.
AUTO means on and off twice each day, following the programme.
ONCE means coming on at the first programme time then off at the last
programme time.
To turn the hot water and heating OFF:
(1) Keep pressing the hot water MODE button until the display shows that
hot water is OFF. If the hot water was on, the light will turn off.
(2) Keep pressing the heating MODE button until the display shows that
heating is OFF. If the heating was on, the light will turn off.
To turn the hot water and heating ON:
(1) Keep pressing the hot water MODE button until the display shows
CONT (this is short for continuous). The hot water light will turn on.
The hot water will not turn off in this position.
(2) Keep pressing the heating MODE button until the display shows
CONT (this is short for continuous). The heating light will turn on.
The heating will not turn off in this position.
Temporary Overrides to the Set Programme:
To turn the hot water ON press the hot water OVERRIDE button the light
will turn ON, unless the hot water is operating in the OFF mode.
To turn the hot water OFF press the hot water OVERRIDE button again
– the light will turn OFF.
This button will only work in the AUTO or ONCE modes. It will NOT work
in the OFF or CONT modes.
At the next SET time the Programmer will go back to automatic
operation.
(The same applies to the heating OVERRIDE button)
For a temporary boost of heating or hot water, press the corresponding
EXTRA HOUR button.
Pressing once brings the heating or hot water ON for 1 hour.
Press twice for 2 hours extra, three times for 3 hours extra.
Pressing again will turn the heating OFF.
This button works in the AUTO, ONCE, and OFF modes. It will NOT work
in the CONT mode.
If the heating or hot water is already ON, pressing the corresponding
EXTRA HOUR button will add the extra hours to the end of the current
ON period.
For guidance on the operation of the other buttons please refer to the complete user instructions supplied with the
product.
Hot Water
OVERRIDE button
HOT WATER HEATING
EXTRA HOUR
OVERRIDE
EXTRA HOUR
OVERRIDE
OK
NEXT
DAY/TIME
HOT WATER
HEATING
RUN
ST940 0S
(1) (2)
HOT WATER HEATING
EXTRA HOUR
OVERRIDE
EXTRA HOUR
OVERRIDE
Heating
OVERRIDE button
Hot Water
EXTRA HOUR button
HOT WATER HEATING
EXTRA HOUR
OVERRIDE
EXTRA HOUR
OVERRIDE
Heating
EXTRA HOUR button
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honeywell ST9400S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honeywell ST9400S in de taal/talen: Engels als bijlage per email.

De handleiding is 0,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Honeywell ST9400S

Honeywell ST9400S Gebruiksaanwijzing - English - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info