32351
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
69-1085
5
CT2700 AN ELECTRONIC ROUND
PROGRAMMABLE THERMOSTAT
Press the thermostat straight on to the wallplate to
latch.
NOTE: To remove the thermostat from the wallplate,
grasp the thermostat on both sides and pull the
thermostat straight out.
Restore power to the heating/cooling system.
7 PROGRAM YOUR THERMOSTAT
The thermostat is preprogrammed for your convenience
with the following time and temperature settings,
see Table 2.
Table 2. Preprogrammed Time/Temperature Settings.
Period
Start
Time
Heating
Setpoint
Cooling
Setpoint
WAKE 6:00 AM 70°F (21°C) 78°F (25.5°C)
SLEEP 10:00 PM 62°F (16.5°C) 82°F (28°C)
WAKE is the time period you want the house at a comfort-
able temperature during the day.
SLEEP is the time period you can set for an energy-
savings temperature while you are sleeping.
NOTE: The heating and cooling program times are the
same. Changing your cooling WAKE time also
changes your heating WAKE time.
The following sequence uses the heating program as an
example; the System switch is in the HEAT position. To
change to the cooling program, move the System switch to
the COOL position and enter the cooling temperature
settings.
NOTE: To exit the sequence at any time, press
until End is displayed.
1. Set Current Time
a. Press .
b. Press or
to set current
time.
If you wish to change the preprogrammed time/ tempera-
ture settings, follow steps 2 through 6. If not, press the
key until End is displayed or the thermostat will
automatically return to normal operational mode within five
minutes.
2. Set WAKE Time
a. Press .
b. Press or
to set desired
WAKE time.
PM
AM
3. Set WAKE
Temperature
a. Press .
b. Press or
to set desired
WAKE temperature.
4. Set SLEEP Time
a. Press .
b. Press or
to set desired
SLEEP time.
5. Set SLEEP
Temperature
a. Press .
b. Press or
to set desired
SLEEP temperature.
6. Run Program
Press . End is
displayed for five
seconds indicating the
end of programming.
The thermostat then
displays the current
time and room
temperature.
8 OPERATE YOUR THERMOSTAT
Display Temperature Setting
a. Press or once
to display present
temperature setting.
After approximately
five seconds, the
thermostat displays the current time and room
temperature.
Temporary Change
a. Press or until
the desired tempera-
ture is displayed.
b. TEMPORARY is
displayed.
The TEMPORARY
change is in effect
until the next program
period.
NOTE: To cancel your TEMPORARY change, press
until End is displayed.
AM
SET
PM
PM
SET
PM
TEMPORARY
AM
SET
AM
SET
AM
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honeywell CT2700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honeywell CT2700 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info