13063
4
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
4
E
Starting A Warm Engine
1. Move the flywheel brake lever to the RUN position.
2. Pull the starter grip lightly until resistance is felt, then pull briskly
(see TYPE 1 Step 4 on page 3).
Stopping The Engine
1. Release the flywheel brake lever to stop the engine.
2. Turn the fuel valve to the OFF position (see TYPE 1 Step 1 on
page 2).
TYPE 4 (AUTOMATIC CHOKE RETURN/FIXED THROTTLE)
Starting A Cold Engine
1. Turn the fuel valve to the ON
position (see TYPE 1
Step 1 on page 2).
2. Move the choke lever to the
choke position ().
3. Move the flywheel brake
lever to the RUN position.
The choke lever
automatically begins moving
to the OFF position when
the flywheel brake lever is moved to the RUN position.
4. Start the engine.
Recoil Starter Types
Pull the starter grip lightly until resistance is felt, then pull briskly
(see TYPE 1 Step 4 on page 3). Begin pulling the recoil starter as
soon as you move the flywheel brake lever to the RUN position
and the choke starts moving to the OFF position.
If the engine does not start before the choke moves to the OFF
position, repeat steps 2 and 3, then continue starting.
Electric Starter Types
Turn the starter switch (located on equipment) to the START
position, and hold it there until the engine starts. When the engine
starts, allow the engine switch to return to its normal position.
NOTICE
Do not use the starter for more than 5 seconds or starter motor
damage may occur. If the engine fails to start, release the switch
and wait 10 seconds before operating the starter again.
If the engine does not start before the choke moves to the OFF
position, repeat steps 2 and 3, then continue starting.
The throttle is preset on this type.
Starting A Warm Engine
1. Move the flywheel brake lever to the RUN position.
2. Pull the starter grip lightly until resistance is felt, then pull briskly
(see TYPE 1 Step 4 on page 3), or operate the starter switch
(electric starter types).
Stopping The Engine
1. Release the flywheel brake lever to activate the flywheel brake and
stop the engine.
2. Turn the fuel valve to the OFF position (see TYPE 1 Step 1 on
page 2).
TYPE 5 (MANUAL CHOKE/FIXED THROTTLE)
Starting A Cold Engine
1. Turn the fuel valve to the ON
position (see TYPE 1
Step 1 on page 2).
2. Pull the choke rod to the ON
position.
3. Turn the engine stop switch
to the ON position.
4. Pull the starter grip lightly
until resistance is felt, then
pull briskly (see TYPE 1 Step 4 on page 3).
5. If the choke was used to start the engine, move the choke rod to
the OFF position as soon as the engine warms up enough to run
smoothly without use of the choke.
The engine speed is preset on this type.
Starting A Warm Engine
1. Turn the engine stop switch to the ON position.
2. Pull the starter grip lightly until resistance is felt, then pull briskly
(see TYPE 1 Step 4 on page 3).
Stopping The Engine
1. Move the engine switch to the OFF position.
2. Turn the fuel valve to the OFF position (see TYPE 1 Step 1 on
page 2).
TYPE 6 (REMOTE THROTTLE/BLADE BRAKE CLUTCH)
Starting A Cold Engine
1. Turn the fuel valve to the ON position (see TYPE 1 Step 1 on
page 2).
2. Move the choke/
throttle/stop lever to
the CHOKE position.
Make sure the blade
control lever is
disengaged (see
equipment manual).
3. Start the engine.
Recoil Starter Types
Pull the starter grip
lightly until
resistance is felt,
then pull briskly (see
TYPE 1 Step 4 on
page 3).
Electric Starter Types
Turn the starter switch (located on equipment) to the START
position, and hold it there until the engine starts. When the engine
starts, allow the engine switch to return to its normal position.
NOTICE
Do not use the starter for more than 5 seconds or starter motor
damage may occur. If the engine fails to start, release the switch
and wait 10 seconds before operating the starter again.
4. As soon as the engine starts, slowly move the choke/throttle/stop
lever to the FAST position.
5. Allow the engine to warm to operating temperature, then engage
the blade control lever (see equipment manual).
CHOKE
LEVER
OFF
ON
RUN
FLYWHEEL
BRAKE LEVER
STOP
ENGINE STOP SWITCH
CHOKE
ROD
ON
ON
OFF
SLOW
CHOKE
CHOKE/
THROTTLE/
STOP
LEVER
FAST
STOP
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Honda-Honda-Engines-GCV190

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Honda Honda Engines GCV190 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Honda Honda Engines GCV190 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Honda Honda Engines GCV190

Honda Honda Engines GCV190 Gebruiksaanwijzing - Nederlands - 64 pagina's

Honda Honda Engines GCV190 Gebruiksaanwijzing - Nederlands - 16 pagina's

Honda Honda Engines GCV190 Gebruiksaanwijzing - Deutsch, English, Français, Italiano, Espanõl - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info