665714
3
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
Safety instructions
Thank you for choosing this machine! To get the best use from your machine please read the following carefully.
This User Manual is designed to help you get the most out of your welding equipment.
Read and understand the following safety recommendations before using or servicing the unit.
Any modification or maintenance not indicated in the manual must not be carried out.
The manufacturer is not responsible for any injury to the operator or damage to the equipment or surrounding area,
due to failure to follow the instructions detailed in this manual.
If there is any issue or uncertainty, please consult a qualified individual to operate the equipment correctly.
Workplace
This equipment must only be used for welding operations in accordance with the limits indicated on the descriptive
panel and/or in the user manual. The operator must respect the safety precautions that apply to this type of
welding. The manufacturer is not responsible for any incorrect or dangerous operation.
According to the standard IEC 60974-10, this class A device is designed to be used in an industrial or professional
environment.
It can be difficult to ensure electromagnetic compatibility, due to conducted disturbances as well as radiation.
This equipment must be used and stored in a place protected from dust, acid or any other corrosive. Operate the
machine in an open, or well-ventilated area.
Operating temperature:
Use between 10 and +40°C (+14 and +104°F).
Store between -25 and +55°C (-13 and 131°F).
Air humidity:
Lower or equal to 50% at 40°C (104°F).
Lower or equal to 90% at 20°C (68°F).
Up to 2,000m above the sea level (6500 feet).
Do not use this equipment to thaw pipes, to charge batteries, or to start any engine.
Individual protection
Arc welding can be dangerous and can cause serious and even fatal injuries.
Protect yourself and protect others.
Welding exposes the user to dangerous heat, arc rays, electromagnetic fields, noise, gas fumes, and electrical
shocks. People wearing pacemakers are advised to see their doctor before using this device.
In order to protect against burns and arc eye, protective clothing should be worn at all times: fire-proof clothing
(cotton, overalls or jeans), protective gloves and a fire-proof apron, ensuring whole body is covered.
Wear protective gloves which guarantee you an electrical and thermal insulation.
It may be necessary to install fireproof welding curtains to protect others against arc rays, weld spatters and sparks.
Inform the people around the working area to not look at the arc ray or the molten metal and to wear protective
clothes.
It is necessary to protect yourself with a welding hood (rated NR.10 or higher) and to protect your eyes during the
operation.
Do not operate whilst wearing contact lenses.
Ensure ear protection is worn by the operator and anyone in the surrounding area if the work exceeds the
authorised noise limit.
DO NOT TOUCH moving parts (e.g. engine, fan...) with hands, hair, clothes etc...
The rollers must not be touched when the wire feeder is working.
Never remove the safety cover of the wire feeder when the machine is plugged in - The manufacturer is not
responsible for any accident or injury that happens as a result of not following these safety precautions.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gys TIG 250 AC-DC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gys TIG 250 AC-DC in de taal/talen: Engels als bijlage per email.

De handleiding is 1,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info