637252
4
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
#0057088
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce
modifications. Sous réserve de modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression! 11/2006
20
Assembly instructions
Assemble the boatstand by fitting together the front
support (part 1), the rear support (part 2) and the
side panels (part 3); take care to glue the joints
securely. Paint the finished stand when the glue is
dry, and apply the self-adhesive foam tape (part 4)
to the contact surfaces (not shown in the photo).
The tape avoids scratches to the painted hull.
Assemble the keel / mast socket (part 5).
IMPORTANT: don’t follow the outside shape of the
vacuum-moulded parts when gluing the parts
together. It is the inside area, which accepts the
keel, which is important: the sides must be exactly
parallel, otherwise the keel will not fit properly later.
Glue a mast support reinforcement (part 6) on each
side of the keel / mast socket on the underside, at
the position of the semi-circular lugs.
Glue together the two servo mount supports (part
7), and adjust the slot for the keel / mast socket so
that the supports are an easy sliding fit on the
socket. Glue this assembly to the keel / mast
socket, aligned exactly as shown; the dimensions
are stated on the plan. NOTE: one of the supports
has a deeper slot for the keel / mast socket; this
part should face down.
Glue the completed keel / mast socket in the hull
(part 8), taking care to position it accurately. Apply
a fillet of UHU acrylit all round on the underside, to
ensure that the socket is completely watertight.
Sand back the bow reinforcement (part 9) until it is
an easy, snug fit in the tip of the bow. Glue the
reinforcement in place securely using UHU acrylit.
NOTE: take care to position the reinforcement
accurately, as the central girder (part 25) must rest
on it later.
Glue one of the rudder bush reinforcements (part
10) over the hole for the rudder bush.
Glue the two reinforcements for the sail servo (part
12) and the reinforcement for the jib trim servo
(part 13) to the underside of the servo plate (part
11). Adjust the opening for the keel / mast socket
so that the plate is a snug sliding fit over it, without
compressing the socket. NOTE: the servo plate
without the servo opening should be used if you
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Graupner MICRO MAGIC 2014 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Graupner MICRO MAGIC 2014 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info