637252
3
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
#0057088
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce
modifications. Sous réserve de modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression! 11/2006
19
Notes on building the model
This model is not intended for the beginner to modelling, and for this reason the instructions do not cover
every single step of construction, as we assume that the experienced model builder will be familiar with
these standard techniques.
We recommend that you visit the Internet website www.micromagic-rc-segeln.de for the latest information
on assembling and setting up the model.
If you do not understand the technical terms relating to sailing boats, you can download a sketch showing
the basic terminology from the Internet site mentioned above.
Before you start building the boat, please take the time to study the plan and read right through the
instructions, referring constantly to the Parts List. In general terms the instructions and parts list reflect the
sequence of assembly.
The laser-cut wooden components are retained in their sheets by small lugs. Cut them through from both
sides using a sharp knife, then break the parts away from the waste material.
All the laser-cut parts have a black outline caused by the cutting process. You can easily sand this off if
you wish.
The wooden internal parts for the hull are accurately pre-cut, but it is still important to trim them to match
the shape of the hull and deck precisely. If the bulkheads are a tight fit, they will show through on the
outside of the hull, so it is important to trim the parts as carefully and as accurately as you can.
TIP: the rigging cord is easier to thread through small holes and openings if you first apply a drop of cyano
to the end to harden it, then cut off the frayed extremity.
Compare the laser-cut parts with the sketches at the end of these instructions to help you identify them
and assign the part numbers.
Wooden parts which have been coated with GLATTFIX sanding sealer cannot be glued satisfactorily using
UHU acrylit or STABILIT express, so keep the sealer away from the joint areas. You should also avoid
smearing excess adhesive onto the model’s surfaces, as this will often prevent paint adhering properly.
This applies in particular when you are gluing the vacuum-moulded plastic parts.
Please bear in mind that many tools can be dangerous if misused or handled carelessly.
Deploy the receiver aerial as high up in the hull as possible. Reception will be very poor if it is positioned
below the waterline, and effective range will be greatly reduced.
It is important to clean the joint surfaces carefully before gluing parts together. This is best done by
sanding lightly, followed by wiping with a non-greasy liquid detergent or methylated spirit (“meths”). The
same applies to all surfaces which are to be painted, as this improves the paint’s adhesion considerably.
Recommended adhesives for joining particular materials:
Material - material Suitable adhesives
Metal - metal Cyano-acrylate, UHU plus
ABS - wood Cyano-acrylate, UHU acrylit
ABS - ABS Cyano-acrylate, UHU acrylit, UHU plast spezial
ABS - metal Cyano-acrylate, UHU acrylit
Wood - wood Cyano-acrylate, UHU hart, white glue
Wood - metal Stabilit express
Read the instructions supplied with the adhesives. Be sure to observe any special notes in the instructions regarding particular
adhesives. If you are using acetone, methylated spirits or any other solvent as a cleaning agent, special safety measures are
necessary. Read the instructions supplied with these materials.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Graupner MICRO MAGIC 2014 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Graupner MICRO MAGIC 2014 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info