329749
3
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
5
Verminderte Hintergrundbeleuchtung der Anzeige
Zwischen 22.00 und 5.59 leuchtet die Anzeige nicht so hell
wie tagsüber (wenn die Zeitschaltuhr in dieser Zeit nicht
verwendet wird).
ÄNDERUNGEN, WELCHE DIE FUNKTION DES GERÄTES NICHT BEEINFLUSSEN, BLEIBEN
VORBEHALTEN.
Electronic program timer with sensor probe GB
Electronic timer with sensor probe provides programmed
oven operation and therefore programmed roasting or
baking time.
Special feature of this timer is the probe for measuring
temperature inside the piece of roast.
Timer clock dial is divided to green and red sector.
Green sector displays current daily time or two timer settings
for duration and end of timer operation.
Red sector indicates temperatures.
1. Operation time setting button
2. End of operation setting button
3. Conventional operation setting button
4. Temperature setting button
5. Jog dial
6. Arrows 1-5
Single-handed timer control
Timer clock may be controlled single handed. By pressing
any of the buttons 1 through 4 (and releasing it) you will
switch on the arrow above the selected button, and the arrow
5 above the jog dial 5 starts flashing. Jog dial is used to
select the desired setting within 4 seconds. In case no
setting is selected during these 4 seconds, the function
will not be activated (the display returns back to the current
daily time).
Setting the current time
After connecting the appliance to the mains the green display
indicates flashing 0 00 and arrows 1 and 2 intermittently. The
current time is obtained by pressing buttons 1 and 2
simultaneously (and release them afterwards). The display
indicates 12.00, and arrow # 5 starts flashing. Set the correct
time by turning the jog button. The clock starts running 4
seconds after the last turn of the jog, all the arrows
disappear. The clock has been automatically set to manual
(conventional) mode. In case of power failure, you need
to reset the timer!
Setting the conventional (manual) operation
To be able to use the oven in conventional mode, arrow 3
must not flash, so always check the program timer: in case
the arrow 3 flashes, press the button 3. When the arrow
disappears the oven is set to the conventional (manual)
mode of operation!
Programmed oven operation
By means of program timer the oven operation may be set to
three different modes of operation:
Semi-automatic: immediate start of oven operation, and
preset automatic stop time;
Automatic: entirely automatic oven operation preset start
and stop time;
Automatic with sensor probe: automatic oven operation
and stop time set by the sensor probe when the
temperature in the meat core is obtained.
IMPORTANT!
In case you wish to interrupt programmed oven operation,
you must first recall the settings back to 0.00 and press
button 3, to make arrow 3 disappear.
By pressing adequate buttons you may at any time check
and reset your settings.
Jog dial 5 may be turned either direction.
In case of power failure new clock setting is required!
Semi-automatic operation
In this mode you determine the period of oven operation
(period of operation).
Maximum setting is 23 hours and 59 minutes!
Procedure:
Example for easier setting procedure:
Let's set the operation period to 1 hour and 20 minutes
(1.20)!
1. Setting the operation period:
Press button 1 (display indicates 0.00 and arrow 5 starts
flashing) and turn jog dial 5 right, until it shows 1.20.
When this is set and you stop turning the jog, after 4
second lapse arrow 5 stops flashing, display indicates
daily current time and arrows 1 and 3 are lit.
2. Turn the oven on:
Use oven buttons to set the heating mode and roasting
temperature.
3. Oven starts operating immediately after turning on (start
of roasting/baking); arrows 1 and 3 are lit during the
operation.
4. After the expiry of preset time - in our case after 1 hour
and 20 minutes -
the oven stops automatically (roasting/baking is over),
sound alarm is heard which may be switched off by
pressing any button, or left to switch on automatically
after 2 minutes,
arrow 1 disappears,
arrow 3 flashes.
5. Turn the oven off, press button 3 and the arrow 3
disappears!
When the arrow 3 disappears the oven is ready for
conventional (manual) operation.
Automatic operation
In this mode you determine the period of oven operation
(period of operation) and the switching off time (end of
operation).
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gorenje b 50 pp bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gorenje b 50 pp in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info