DEVICES
In this menu, you can check :
Press MENU/OK and ▲/▼ to select DEVICES.
STATUS: This function will let you know if the device is connected.
LOG: This function is to display the doorbell list action
RENAME: This function is to change the name of your device
PHONEBOOK
Your phone can store up to 50 private phonebooks in the cordless
handset with names and numbers. Each phonebook entry can have
a maximum of 20 digits for the phone number and 10 characters for
the name.
Phonebook entries are stored alphabetically by name.
To Add new entry
In idle mode:
Press MENU/OK (14) and ▼/▲(15/17) to select PHONEBOOK
and press MENU/OK to access the phonebook list (or empty).
Press MENU/OK 2 times to select ADD.
Press MENU/OK to select NUMBER, enter number.
Press MENU/OK to select NAME ,enter the name.
Press MENU/OK to save.
SOS EMERGENCY CALL
SOS Settings
You need to set the SOS numbers before you can make SOS
emergency calls.
In idle mode:
Press MENU/OK and ▲/▼ to select SET SOS.
Press MENU/OK and ▲/▼ to select SOS NUMBER.
Press MENU/OK and ▲/▼ to select the SOS number to edit
(SOS 1, SOS 2, S OS 3 or SOS 4).
Press MENU/OK and select ADD to enter a new number or
EDIT to modify the number stored already.
Press MENU/OK and enter a new name or edit the name
stored already.
Press MENU/OK to confirm or CANCEL/MUTE to
delete.
Make SOS Emergency Calls
Press and hold 3 seconds SOS key on the handset to enter the
emergency calling sequence from the SOS 1 number to SOS 4
number. A call will be first dialed to the SOS 1 number. If the SOS 1
number does not answer in 60 seconds, the call be will made to the
SOS 2 number, and so on.
Note: The other party receiving the SOS message must press any
number on their phone to open the SOS call. Thereafter by pressing
any number on their phone every two minutes will keep the emergency
call open unless the phone stops the call 10 seconds after.
Record SOS Messages
You can record your customized SOS message to be played when
you dial out an SOS emergency call otherwise the default message
will be played.
Press MENU/OK and ▼/▲to select SET SOS.
Press MENU/OK and ▲/▼to select SOS MSG.
Press MENU/OK and ▼/▲ to select RECORD.
Press MENU/OK to start SOS message recording and
“RECORDING” will be displayed.
Press MENU/OK to save your SOS message.
Play SOS Messages
Press MENU/OK and ▲/▼ to select SET SOS.
Press MENU/OK and ▲/▼ to select SOS MSG.
Press MENU/OK to show PLAY.
Press MENU/OK to start SOS message playback.
Press 5 key to stop SOS message playback.
SET SPEED DIAL KEYS IN HANDSET (KEYS 1 TO 9)
In idle mode:
Press MENU/OK and ▲/▼ to select PHONEBOOK.
Press MENU/OK and ▲/▼ to select SPEED DIAL.
Press LEFT SOFTKEY, use. ▲/▼ to select the speed dial key.
Press MENU/OK , select ADD or EDIT.
Press MENU/OK and enter the phone number.
Press MENU/OK to enter the NAME.
Press MENU/OK .to confirm.
To use one speed dial key, press and hold in idle mode the key
between 1 to 9 for 3 seconds (you hear a beep of confirmation).
PICTURE BIG BUTTON MEMORIES
Function available only on the Combi Dect 595
FUNCTION BLACK LIST
You can block 20 phone numbers. For this, you must complete the
black list number.
In idle mode:
Press MENU/OK and ▲/▼ to select CALL BLOCK.
Press MENU/OK and ▲/▼ to select BLACK LIST.
Press MENU/OK 2 times and select ADD or EDIT.
Press MENU/OK and enter the phone number.
Press MENU/OK to enter the NAME.
Press MENU/OK .to confirm.
ANSWERING MACHINE
Your telephone base includes a telephone answering machine that
records unanswered calls when it is on. The answering machine can
store up to 59 messages within the maximum recording time of
approximately 30 minutes. As well as recording incoming messages,
you can record memos for other users of your phone.
Switching Answering Machine On/Off
In idle mode:
1. Press MENU/OK and ▼/▲ to select ANS.SYS.
2. Press MENU/OK and ▼/▲ to select TAM ON / OFF
3. Press MENU/OK and ▼/▲ to select ON or OFF.
4. Press MENU/OK to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW
MESSAGE, which means you have 2 new messages. The new
messages are played first, and then are saved as old messages, until
they are deleted. Old messages are played again after all new
messages are played completely.
In idle mode:
1) Press MENU/OK and ▼/▲ to select ANS. SYS.
2) Press MENU/OK to show PLAYBACK.
3) Press MENU/OK again to start message playback and the
screen displays the date and hour of the message received.
4) During message playback, press ▼/▲ to adjust the message
playback volume respectively.
NOTE: After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
5) Press LEFT SOFTKEY and ▼/▲ to select STOP,
FORWARD, PREVIOUS or DELETE to perform the following
functions during message playback.
• STOP: Stop the current message playback and return to the ANS.
MACHINE menu.
• FORWARD: Skip to play the next message. The date and hour
information of the next message will display if there is next message.
• PREVIOUS: Skip to repeat playing the current message from the
beginning. The date and hour information of the current message
will display.
• DELETE: Delete the current message and the next message will
be played.
6) Press MENU/OK to confirm the setting.
Set the Answer Delay
You can set the number of rings before the answering machine
answers and starts playing your OGM. You can set the answering
machine to answer after two to eight rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the
first new message has been registered - then the answering machine
switches to answering after approximately 2 signals. This is useful
when using remote access; if you call up the answering machine and
there is no reply after four rings it means there are no messages
recorded and you can hang up before you are charged for the call.
In idle mode:
1) Press MENU/OK and ▼/▲ to select ANS. SYS.
2) Press MENU/OK and ▼/▲ to select SET TAM.
3) Press MENU/OK and ▼/▲ to select ANSWER DELAY
(Available options: 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS, 10
RINGS or TOLL SAVE).
4) Press MENU/OK to confirm.
Function Message Alert
When you have a new message, you can hear a beep every 10
seconds.
If you want deactivate this beep, follow the procedure.
In idle mode:
1) Press MENU/OK and ▼/▲ to select ANS. SYS.
2) Press MENU/OK and ▼/▲ to select SET TAM
3) Press MENU/OK and ▼/▲ to select MSG ALERT
4) Press MENU/OK and ▼/▲ to select OFF
5) Press MENU/OK to confirm.
REMOTE OPERATIONS
If you are away from your home, you can call your answering machine
to switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1) Place a call from a tone-dialing phone.
2) When the answering machine answers the call and starts playing
OGM, press .
3) Enter the 4-digit Remote Access PIN (default PIN is 0000).
4) Press the following keys to carry out your desired function.
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth. Do not
use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc AMPLIDECT595 U.L.E is purchased,
Geemarc guarantee is for the period of two years. During this time,
all repairs or replacements (at our discretion) are free of charge.
Should you experience a problem then contact our help line or visit
our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages
to any parts. The product must not be tampered with or taken apart
by anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE
AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF
A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS:
CE Directives
Geemarc Telecom SA hereby declares that this AMPLIDECT595
U.L.E is in compliance with the essential requirements and other
relevant provisions of the Radio Equipment Directive 2014/53/UE.
The CE declaration of conformity may be consulted at
www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been
put in place for the products at the end of their useful life are recycled
in the best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE
skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one,
they should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
For product support and help visit our website at www.geemarc.com
E-mail : help@geemarc.com
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
2 Rue Galilée, Parc de l’Etoile, 59791 Grande-Synthe, France
This product is made in China To Geemarc Telecom
QUGAMPLIDECT595ULE_En_A3_V1.4
