Fill the heating tank without exceeding the limit set at 1 liter of water.
Close the safety cap carefully without overtightening.
Ensure that the diffuser is correctly placed on its support. Plug in the
power cord.
Press the on/off button
Wait for the “steam ready” indicator light to come on
before pressing the steam outlet button
Residual water droplets may be propelled during start-up.
Warning: if the heating tank contains too much water, the device will spit
out the excess water when the steam button is pressed. If you notice this
phenomenon, let the excess water escape over a container (be careful of
splashing hot water). The phenomenon will disappear once the level returns
to normal.
Wait for the tank to cool completely before opening the
filling cap.
When the device no longer produces steam,
• Disconnect the device from the electrical network
• Slowly unscrew the safety cap. Before unscrewing it
completely, wait until the hissing sound created by the residual steam
disappears.
• Use the graduated container with the funnel to fill with a maximum of
1 liter of water
• Screw the safety cap without tightening too tightly
• Connect the device to the electrical network
Store the steam diffuser in its holder
Press the on/off button to the off position
Disconnect the device from the electrical network
