714637
62
Verklein
Vergroot
Pagina terug
1/65
Pagina verder
EN EN
122 123
PREPARATION FOR CLEANING
1. Press the control dial until only dashes are shown on the display areas (see:
‘After Usage’). Unplug the machine.
2. Remove the removable parts (see: ‘After Usage’).
CLEANING THE HOUSING
IMPORTANT - For getting a stable stand on the work surface, the suction cups
at the feet of the machine must be clean. Usually, you do not need to clean the
suction cups. However, when flour or sticky liquids have been on the work sur-
face, the suction cups may get polluted, causing the machine to excessively move
around during operation. In this case, you should remove any pollution from the
suction cups. For this, always use only soft clothes. Do not scratch or scrape on
the suction cups.
3. Hold the unlock button at the joint of the mixing arm pressed, while moving the
mixing arm to the upper position. Ensure that the mixing arm engaged securely
in this position.
4. If required, remove any residues and splashes from the drive shafts of the mixing
drive and from the bottom of the mixing arm with a soft, slightly damp cloth. Then
press the unlock button and slowly lower the mixing arm to the operating position.
5. Wipe the housing of the mixer. Avoid dripping any liquids into the joint of the
mixing arm. Wipe any food particles from the power cord.
6. Carefully wipe dry the housing after cleaning. If required, carefully clean the
suction cups at the feet of the base plate: For this, the mixing arm must be enga-
ged in the lower operating position. Lay the machine (without mixing tools and
mixing bowl) carefully onto its left side. Use a SOFT, damp cloth for cleaning.
After removing any residues, wipe with clear water and thoroughly dry the suc-
tion cups via a soft cloth.
CLEANING THE TOOLS AND ACCESSORIES
IMPORTANT - Do not clean the mincing discs in the automatic dishwasher. We
recommend to clean the steel mincing discs regularly, even when they have not
been used. This will avoid a rancid or resinous taste and smell. Always rub the
mincing discs with some cooking oil after cleaning. If you wish to use an auto-
matic dishwasher for cleaning, carefully observe the instructions given in the
following section (‘Cleaning in the Automatic Dishwasher’).
Problem Reason Easy solution
There are residues of food
or liquids within the min-
cer coupling of the mixing
arm.
The processed food has
been too runny and/or
too juicy.
Only process types of food via the mincer, which do not
give off much juices when being pressed. The mincer is
NOT suited for juicing fruit and vegetables. Additionally,
it is not suited for processing any type of runny food. Do
not pour any liquids into the feed chute, while the mincer
is assembled to the mixing arm of the machine.
The screw ring got loose. When assembling the mincer, turn the screw ring some-
what tighter. However, do not turn it with violence. Ensu-
re that the mincer is assembled completely and correctly
(see: ‘Using the Mincer’).
The mincer is not assem-
bled correctly.
Ensure to assemble the mincer completely and correctly accor-
ding to the instructions, before starting operation (see: ‘Using
the Mincer’).
CARE AND CLEANING
WARNINGAlways ensure that the machine is out of reach of young
children! Do not hold your hands or any foreign objects (e.g. cooking utensils,
brushes, clothes) onto the moving parts (mixing drive, mixing tools, worm shaft and
cross blade of the mincer), while the machine is connected to the power supply.
Always switch off the motor (press the control dial) and unplug from the mains
power supply, before moving or cleaning the machine. Do not touch the machine
with wet hands or when the machine is wet (e.g. by condensate), while the machi-
ne is connected to the power supply. Do not place the machine on a power cord
or on wet surfaces. Do not immerse the machine or power cord into water or any
other liquid. Do not spill any liquids onto the machine.
CAUTIONDo not use any hard or sharp-edged objects, corrosive chemicals,
disinfectants, abrasive cleaners, or metal scouring pads for cleaning the machine or
any part of it. Do not poke with any foreign objects in the mincer coupling, mixing
drive, or in the joint of the mixing arm. Do not use violence. Do not place the machi-
ne or the power cord in an automatic dishwasher. Additionally, some accessori-
es and tools are NOT suited for cleaning via hot water and/or in an automatic
dishwasher (see below: ‘Cleaning in an Automatic Dishwasher’).
62

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gastroback 40977 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gastroback 40977 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info