29045
3
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
Airplane Section
14.
Flight Conditions Switching
If you like, you may set up the system to call up
more than one function or switch to a new set of trims
or control settings simultaneously by moving a single
switch. You can have different subtrims, coupling,
differential, exponentials, and throw volumes. In fact
you may change EVERY parameter between flight
modes.
We recommend that you fly the model and adjust
trims and control responses to your liking before
defining another flight condition. Any bad tendencies
may be corrected with custom programmable mix
settings
PMX
. Then, copy the set of adjustments to
a new flight condition, where they may be modified
for the new desired conditions. After copying you
may add new functions as necessary.
Use the Condition Select
CSL
button in the
Model Menu. This function allocates the necessary
number of flight conditions to the model memory.
Note the condition number next to the D (default) in
the display. This is the set of conditions that will be
copied into a new condition and modified. Also note
the number after the next display. You will copy to
this condition.
Use the Copy Condition
CPC
from the System
menu. This function copies the contents of one condi-
tion into another. Choose the default flight condition
number, press the SET button, then choose the second
condition number in the lower box "TO CONDI-
TION." Give the command to copy.
15.
Volume Setting
Some functions can have their mixing ratio vary
with the motion of another slider or knob: use the
VOL key O to get to this choice (for example, see
ADF). Move the selected control to determine how it
affects the mix. You can also add a time delay on
many of the menus: look for a DELAY setting.
16. Programmable Mixers
Up to five mixers are available in all flight condi-
tions. These may be used to enhance flight capabilities
or to correct bad tendencies by adjusting mixing from
one control to another. For example, you may use
Elevator->Flap coupling to tighten up the corners on
square loops, Throttle->Rudder coupling to correct
for torque tendencies, etc. There is no limit to the
number of corrections that can be made.
Your PCM 1024Z system is filled with powerful,
predefined mixing functions. Be sure to browse through
the various function menus in the Aircraft section follow-
ing this example.
The switch that calls the flight conditions should
be selected. Return to the Condition Select
CSL
function, press the desired flight condition number,
and use the SWT button to choose the desired switch
location. Once you have selected a condition, use the
CNA (Condition NAme) button to label the new con-
dition (you may have to flip the chosen switch to the
correct position to get the desired condition). Now,
you may go through the Condition menu items to get
the desired settings in the new mode. Read the condi-
tion name after the model name to be sure you are
changing the condition you want.
Airplane Section, Page 79
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Futaba 9ZAP_part2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Futaba 9ZAP_part2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info