28989
37
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
ABRK — Airbrake Function
The ABRK function, when activated, simultaneously moves the flaps and offsets the elevator,
and may be used to make steep descents or limit airspeed in dives. All the controls move to the
defined positions by flipping the airbrake switch downwards. Normally, with a single flap, the
flap is dropped. With flaperons, you’ll want to raise both to prevent tip-stalling, but you may
experiment with small values of down flaperons to slow the model down.
When the airbrake function is active, both ailerons’ travel is set by a single number. The
elevator offset should be chosen to maintain trim when the airbrake function is turned on and the
ailerons rise.
Setting up Airbrake function
1. Use the up or down arrow keys to select the ABRK window.
2. Press the CURSOR key twice to get to the activation setting. The INH
indicator will flash on and off.
3. Now press the (+) key to enable the airbrake function. Depending on the
position of the airbrake switch, the display will show a flashing OFF or ON.
4. First the amount of elevator offset is programmed. Press the CURSOR one
time. A small arrow is displayed under the numeral 2 (representing
elevator), and the percent sign will blink on and off. You may adjust the amount of travel
with the (+) and (–) keys. You may use anywhere between -100% and +100%, but the
default value of -10% is the recommended starting value. Be careful setting elevator offset,
as this has a very powerful effect on the model’s trim. Press both the (+) and (–)
simultaneously if you wish to reset to -10%.
5. To get to the flap travel setting, press the CURSOR key. A small triangle is
now displayed underneath the numeral 6, indicating the flap channel. In
addition, the percent indicator will flash on and off. You may input any desired flap travel
with the (+) and (–) keys. Although the default is -50%, you may set this anywhere from -
100 to +100%. You may return to the default settings by hitting both the (+) and (–) keys
together.
Note: if you have the flaperon function active, the ABRK function will cause both flaperons to
move. Be very cautious with large flap settings, as they may reduce the aileron authority
when you are flying slowly.
– 32 –
37

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Futaba 6XA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Futaba 6XA in de taal/talen: Engels als bijlage per email.

De handleiding is 1,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Futaba 6XA

Futaba 6XA Gebruiksaanwijzing - Espanôl - 55 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info