771574
3
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
Overview
Basic feature: IP20
Suitable for air-conditioning duct.
Technical Parameters:
Model MDL-PSM10W MDL-PSM18W MDL-PSM28W
Power(W) 10 18 28
AC Source 220-240V~ 50/60Hz
Rated Current (A) 0.05 0.095 0.16
Product Size
L*W*(h1+h2)(mm) 250*157*(72+227) 250*157*(72+371) 250*157*(72+565)
Airow(m3/h) <1500 <2600 <4300
Safety Precautions
To prevent accidents such as damage, fall, electric shock and re, which may
cause personal injury, please install and use the PCO-kit in strict accordance with
the instructions.The PCO-kit is not replaceable by the user. Do not alter the UV-C
tube or replace the components!
The power supply must be within the rated voltage.
(If the PCO-kit works at voltages outside of range for a long time, it may be
damaged.)
Ask a specialized technician to check or repair the PCO-kit.
(Operations performed by a non-professional staff may cause danger.)
In case of exception, cut off the power supply immediately and contact the sales
store.(Provide the model for maintenance. Refer to the label attached to the
control box.)
The external exible cable or cord of this device are not replaceable. The PCO-
kit would be discarded if exible cable or cord are damaged.
When installing PCO-kit, it should not be too close to the air outlet.
(Too close to the air outlet, the ultraviolet rays of the PCO-kit may cause harm
to people, animals or plants.)
UV-C tubes are hazardous materials, do not discard them at will; please handle
them according to the recycling management of hazardous materials.
Do not look directly at the pco-kit when the UV-C lamp is working.
The pco-kit installation position is more than 1.5 meters away from the air outlet.
The cable between the signal port and the controller should not exceed 3 meters.
Fibre-duct need metal support (from local market) inside duct and reserve
inspection hole on duct bottom.
2
Main Components Name
Main Components Function
1
2
3
4
1
23
4
5
Power Swicth Key
Digital Tube
Set Button
Signal Line Port
(Alarm Port &Control Port)
Power Cable
1. Digital tube display:
(1) Display “U1” or “U2”, U1 mode is a stand-alone mode,U2 mode is a multi
-machine mode.When the PCO-kit is powered on, or when the "Set" key is
pressed, U1 or U2 are displayed.
(2) When the PCO-kit works normally, the life of the UV lamp is displayed.
(3) Error code display. When the PCO-kit fails, the fault code and life time will be
displayed in turns at 3S intervals.
2. Set button:
1) Switch working modes U1 and U2.
2) When the service life of the UVC-tube ends, long press(about 5s) this button to
reset to the default value of 8000 hours.
3. Alarm port (1,2): PCO-kit outputs an abnormal output signal to the control panel
to remind the user that the product is abnormal.
4. Control port ( 3, 4): The user can control the "running" and "stop" states of
PCO-kit on the control panel interface. When the PCO-kit is turned on, it will
start to work after 5s, if the air duct is windy; when there is no wind in the air
duct, the PCO-kit will not work.
Fault Code Description
Wind sensor failure.
UV-C tube is not bright or the photoresistor is damaged.
There is light detected when the UV-C tube is not turned on.
The photoresistor is damaged or the structure has light leakage.
Ballast failure.
End of life of UV-C tube.
3
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Frigicoll PCO-Kit bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Frigicoll PCO-Kit in de taal/talen: Engels als bijlage per email.

De handleiding is 3.49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info