686544
13
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Frama F-Link
24
F008
F-Link Status: F008
F-Link updates the firmware!
DO NOT SWITCH OFF F-Link!
Wait until READY LED is
switched on again and retry!
F-Link updates its firmware instead of processing your
operation (inspection, credit loading). After the complete
download of the firmware from the FO2 backend server
the installation of the firmware is running and this mes-
sage is displayed on the franking system.
Do not switch of the F-Link is this state. F-Link reboots
automatically to startup with the new firmware. Wait until
the Ready LED is light up stable again. Then please repeat
your operation.
F-Link checks for a firmware upgrade on each call to the
FO2 backend server.
F009
No answer from DHCP server
Change F-Link DHCP settings
on {ipaddress}
Please refer to manual for
further information.
F-Link is configured to get a dynamically IP address from a
DHCP server in your network. But F-Link gets no dynami-
cally IP address from a DHCP server.
Please configure the F-Link network settings properly. To
set the configuration you may access the F-Link configura-
tion pages over the displayed IP address.
Please check the operation of the DHCP server in your
network.
F010
Proxy error.
Change F-Link Proxy settings
on {ipaddress}
or update Proxy Server.
Refer to manual for further info.
The request of F-link is responded with a HTTP error code
(more codes are possible) of local proxy server. The HTTP
error code can be found in the event log of F-Link.
Please configure the F-Link proxy settings properly. To set
the configuration you may access the F-Link configuration
pages over the displayed IP address.
Possible cause for HTTP error code 305 Use Proxy: The
internet is only accessible over the local proxy server.
Possible cause for HTTP error code 407 Proxy Authentica-
tion Required: The username and password for access to
the local proxy server is wrong.
Possible cause for HTTP error code 502 Bad Gateway:
The proxy server cannot communicate with the FO2
backend server.
F011
F-Link Status: F011
Currently no WAN (internet).
Check local DNS, local firewall
and local Proxy-Server.
Refer to manual for further info.
F-Link is connected to the network and has got a valid IP
address in the network. F-Link had access to the internet
and to the FO2 backend server in the past. Currently, F-
Link has no access to the internet and to the FO2 backend
server.
Please check your internet access with another device in
the same network and try again.
Frama F-Link
25
13

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Frama-F-Link

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Frama F-Link bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Frama F-Link in de taal/talen: Engels als bijlage per email.

De handleiding is 2,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info