686544
11
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Frama F-Link
20
3.10 Configuration Page Administration F-Link Log
The F-Link writes an operation log file. You can display the log entries when you open the configuration
page Administration F-Link Log and press the button Refresh.
Frama F-Link
21
4 Troubleshooting
4.1 No access to the configuration pages
When the access to the configuration pages is not possible then different reasons are possible.
1. Network errors
Are you sure that you use the right IP address for the F-Link?
Try a ping to the IP address of the F-Link from the console of a PC in the same network (if ping is
working in your network). When you get no answer from the F-Link then check your network.
2. Proxy configuration errors
It is possible that you use a Proxy server in your network for internet browsing. You must config-
ure the proxy settings of your PC that the local IP address of F-Link is bypassed / excluded by the
proxy server.
3. Login fails / lost login values
If you don’t know the username and password for the F-Link configuration page access anymore,
you can reset the F-Link. After the reset the administrator username and password are on the de-
fault values username: “admin” and password: “admin”.
4. No access by default IP 192.168.1.200
If the F-Link was used before for connections with LAN connection type DHCP or STATIC the ac-
cess over the default IP address 192.168.1.200 is not possible. Perform a reset of F-Link without a
connected network cable (see chapter 4.5). The default IP 192.168.1.200 is now active again for
a configuration by a direct LAN cable connection.
4.2 Old configuration page values
Internet web browsers store data from web pages for offline mode and caches data to show web pages
faster. It is possible that not the actual data are displayed on a configuration page of F-Link. You can clear
the offline and cached data of your browser normally over a menu entry of the browser. Restart the
browser after you clear the offline and cached data and try again.
4.3 F-Link LED status
The different status of the LED’s from F-Link are described in the installation manual
[F-Link Installation Manual, Order-Nr: 1018863].
4.4 No access to Frama FO2 backend server
For a successful connection to the Frama FO2 backend server the following network configurations are
required:
Open firewall ports:
53 DNS
443 HTTPS
Allow access to URL:
fo2.frama.com
The IP address of the URL fo2.frama.com can be found either by using the ping command “ping
fo2.frama.com” in a command line window (if ping is allowed in your network) or by a DNS lookup ser-
vice in the internet.
Proxy servers using SSL-interception require a specific rule in order to allow transparent communication
(franking system via F-Link to FramaOnline2) via https port 443.
The specific rule grants correct identification of FramaOnline2 (https certificate) for the franking system.
4.5 Reset the configuration
The configuration of the F-Link can be reset. Disconnect the LAN cable from F-Link. Press the RESET switch
at the back of the device for a minimum of 10 seconds. After this process the F-Link restores the factory
configuration and all previous configuration settings will be lost. After the reset, the F-Link reboots and is
ready to be reconfigured when the Ready LED is on again.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Frama-F-Link

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Frama F-Link bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Frama F-Link in de taal/talen: Engels als bijlage per email.

De handleiding is 2,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info