686544
5
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Frama F-Link
8
9. Enter the IP settings for F-Link accordingly to your network.
Example:
Press button “Apply”. -> F-Link reboots. Wait until Ready LED of the F-Link is on again.
(The execution of the command may need to be confirmed in the internet web browser)
10. Turn off F-Link.
11. Disconnect direct LAN network cable between F-Link and PC.
12. Set the LAN network settings of the PC back to the previous values (refer to your notes).
13. Connect the F-Link device to the LAN network for the operation with the franking system.
14. Turn on the franking system and the F-Link.
15. Execute business processes on the franking system when the Ready LED of the F-Link is on.
It’s also possible to change to a static IP address when F-Link uses currently a DHCP IP address. In this case
the dynamic assigned IP address has to be entered into the browser address field. Processes for finding
out this address are described in Chapter 2.1.3.
Frama F-Link
9
2.2 Wireless operation
The F-Link device can also operate with a wireless network. By default the F-Link is configured to operate
with a wired connection. Refer to the install manual for information about installing the F-Link on the
franking system for wireless operation.
Access
Point
Remark!
If the F-Link was used with LAN connection type DHCP or STATIC before for connections,
the access to the F-Link configuration page by the default IP address 192.168.1.200 and a
direct LAN cable is only possible after a reset of F-Link.
Configuring the F-Link for wireless operation is done in following steps.
1. Connect the F-Link device directly with a LAN cable to a PC
(A cross-wired LAN cable is needed when the PC doesnt support auto-MDIX).
2. Note the PC LAN network settings for later use.
Set the PC LAN network settings as follows:
IP address: 192.168.1.199
Subnet mask: 255.255.255.0
3. Turn on the F-Link and wait until the Ready LED of the F-Link is on.
4. Open internet web browser on PC.
5. Insert the F-Link default IP 192.168.1.200 into address field.
6. Login with username and password. (Default username: “admin” and password: “admin”).
7. Open configuration page Wireless Settings.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Frama-F-Link

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Frama F-Link bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Frama F-Link in de taal/talen: Engels als bijlage per email.

De handleiding is 2,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info