595755
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
To access a remote camera on a Windows PC, please install
the CMS software and perform relevant operations. For the
installation file and operation guide of the CMS, please refer
to Foscam IP Camera Client user manual in the CD.
NOTES:
If it is the first time to login with Foscam App, the username is
set to admin and the password field is left blank by default. When
you connect your camera to the Foscam app, it will request that
you modify the default username and/or password if both are still
set to default. This is highly recommended and serves as a security
precaution.
Input New Username,
New Password and
Confirm password.
If it is the first time to login with Foscam App, it will go to
"Setup Wizard” automatically. Please set the basic parameters,
such as camera name, camera time, wireless settings and so on.
If you would like to read more details on the Android App,
please refer to the Android App User Manual.
If you would like to read more details on the iOS App, please
refer to the iOS App User Manual.
8 Technical Support
If you have problems with your Foscam IP Camera, please
contact the Foscam reseller you purchased from, or you can
e-mail the Foscam headquarter technical support team:
tech@foscam.com
Your valuable comments and suggestions on improving
Foscam products are welcomed!
4 Wireless Connection
(For FI9851P and FI9853EP)
1. Choose “Settings on the top of the camera page, then go to
the “Network - Wireless Settings section on the left side of
the screen, then click Scan.
Click through different pages to see
other wireless networks if there are
more than 10.
2. Click the SSID (name of your router) in the list, and the
corresponding SSID and encryption will be filled into the
relevant fields automatically on the right side of the page. All
you need to do is input the password for your wireless network.
1. Click the SSID (name) of your router,
and the corresponding information will
be filled in the fields.
2. Input the password of
your wireless network.
3. Click the Save button and disconnect the network cable.
Don’t power off the camera until it is able to show up in the IP
Camera Tool. If the camera does not show up, try unplugging
the power cord from the camera and plugging it back in. It
should connect to the wireless network automatically.
7 Access the IP Camera
by CMS
6 Access the IP Camera
by Smart Phone
(Android or iOS operating system)
If you use android or iOS mobile device, you can access the IP
camera by Foscam App. Mobile phone connecting the camera
after the success, recommend that you modify the user name
and password.
This document takes Android system as an example, the iOS
and android interface only subtle differences, you can still
complete the operation in accordance with this example.
1. Download and Install the Foscam App
Search and install Foscam Viewer on App Store or Google Play
for iOS or Android devices.
2. Click the Foscam Viewer on your phone to run the App.
Click here
4. When you finish the QR code scanning, the UID will be input
automatically, then input Device Name, Username (default is
admin), Password (blank by default), click OK.
If you scan a QR code on the bottom of the
camera successfully, the UID will be displayed
automatically.
Default username is admin with no password.
3. In the IPC management interface, click . Your phone will
go into the QR code scanning mode.
Note:
If the QR code scanning is not successful, click , please input
the UID on the bottom of the camera manually. The procedure for
inputting data is as follows. Click OK.
Select High Definition.
Select P2P UID.
Please input the UID on
the bottom of the camera.
Default username is admin
with no password.
5. So far, the camera has been added successfully. You can click it
from the list to check the live video.
Tap here to connect
the camera.
A green dot indicates the connection is
successful. A red dot indicates issues
with the connection.
If you want to access your camera by web browser outside of your
LAN, you need to configure some settings.
5 Remote Access
1. Choose “Settings” on the top of the camera web page, then go
to the “Network > IP Configuration” section on the left side of the
screen, then uncheck the Obtain IP DHCP.
IP Address: Set this in the same subnet as
your computer , or keep it as default.
Subnet Mask: Keep it as default.
Gateway and DNS Server: Set it to the IP
address of your router.
2. Enable UPnP and DDNS in the camera’s settings page. We
recommend you to use the DDNS by factory default.
Select Yes and click Save.
Click Enable DDNS and click Save.
The content in the Manufacture’s
DDNS column is the domain name
of your camera.
3. You can see the port of your camera here. If you want to set
Remote Access for several cameras on the same network, you will
need to change the HTTPS port for each camera.
4. If the UPnP of the router has been enable, you do not need to
perform following steps. Otherwise, you need to select one of
the following methods to configure port forwarding on your
router. For these steps, we will be using the TP-LINK brand
wireless router as an example.
If there is a UPnP function in your router.
Choose “Forwarding > UPnP”, make sure that the Current UPnP
Status is Enabled.
If there is not a UPnP function in your router.
You need to manually add port(HTTPS port) forwarding,
refer to the following steps. You need go to the
Forwarding > Virtual Servers” panel for setup.
Click Add New.
Input the port and IP address
of your camera and click Save.
5. Now you can access your IP camera by https://domain
name: HTTPS port via the Internet.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Foscam FI 9851P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Foscam FI 9851P in de taal/talen: Engels als bijlage per email.

De handleiding is 15,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Foscam FI 9851P

Foscam FI 9851P Snelstart handleiding - Nederlands - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info