English - 48 -
S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
RF Input6. connects to an aerial antenna system or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
PC Input7. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
HDMI 1: HDMI Input8.
HDMI 2: HDMI Input9.
HDMI 3: HDMI Input10.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LED TV is capable of
displaying High DeÞ nition pictures from devices such as a High DeÞ nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the 1.
channels that you subscribe to. For more information, see “Conditional
Access” section.
USB Inputs. 2.
Note that programme recording feature is available via these USB inputs.
You can connect external hard disk drives to this input.
Side HDMI Input is for connecting a device that has an HDMI socket.3.
Headphone jack is used for connecting an external headphone to the 4.
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
Side audio-video connection5. input is used for connecting video and
audio signals of external devices. To make a video connection, you must
use the supplied AV connection cable for enabling connection. First,
plug singular jack of the cable to the TV’s Side AV socket. Afterwards,
insert your video cable’s (not supplied) connector into the YELLOW input
(located on the plural side) of the supplied AV connection cable. Colours
of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of
the side AV connection cable. Afterwards, insert your device’s audio
cable’s connectors into the RED and WHITE jack of the supplied side AV
connection cable. Colours of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound
connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•
HDMI 3
A02_MB61_[GB]_5110UK_IDTV_TC_PVR_PLATINIUM4_32905LED_10072405_50185331.indd 48 11.03.2011 15:20:40