573122
23
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
TSC 55 REB
23
GB
Screw the rotary knob
[8-3]
through the long
hole in the splinterguard.
Make sure that the nut
[8-4]
is seated securely
in the splinterguard.
You must bed in the splinterguard before using it:
Set the machine to maximum cutting depth.
Set the machine speed to 6.
7.6 Dust extraction
Independent extraction
Secure the connection piece
[9-2]
of the dust
collection bag
[9-3]
at the extractor connector
with a clockwise rotation
[9-1]
.
To empty remove the connection piece
[9-2]
of
the dust collection bag from the extractor con-
nector
[9-3]
with an anti-clockwise rotation
[9-
1]
.
Festool mobile dust extractor
A Festool mobile dust extractor with an extractor
hose diameter of 27 mm or 36 mm (36 mm recom-
mended due to the reduced risk of clogging) can be
connected to the extractor connector
[9-1]
.
The adapter on a suction hose Ø 27 is inserted into
the angle adapter
[9-4]
. The adapter on a suction
hose Ø 36 is inserted over the angle adapter
[9-4]
.
8 Working with the machine
Please observe all mentioned safety infor-
mations and the following rules when work-
ing:
Only guide the machine against the workpiece
when it is switched on.
Check the installation fixture prior to use and do
not use the machine if the fixture does not func-
tion correctly.
After dropping check the power tool and the saw
blade for damage. Have the damaged parts re-
paired before use. Damaged machines may lead
to injuries and cause the machine to be unsafe.
Always secure the workpiece in such a manner
that it cannot move while being processed.
Always hold the machine with two hands on the
handles
[1-1]
when performing work. This re-
duces the risk of injury and is a prerequisite for
precise work.
Always push the machine forwards
[12-2]
, never
draw the machine towards yourself.
Adapt the fast-feed speed to prevent the cutters
on the saw blade from overheating and prevent
plastic materials from melting during cutting.
Make sure that all rotary knobs
[1-2]
are tight-
ened before starting work.
Check that the saw blade is seated securely.
Static charge may occur when sawing (e.g. MDF).
For work that generates dust, wear a dust
mask.
8.1 Switch on/off
Slide the switch-on lock
[1-5]
upwards and press
the on/off switch
[1-6]
(press = ON / release = OFF).
Pressing the switch-on lock unlocks the
plunging mechanism. The saw unit can then
be moved downwards. This causes the saw
blade to emerge from the protective cover.
8.2 Acoustic warning signal
Acoustic warning signals sound and the machine
switches off in the following operating states:
Change the battery
Reduce the machine load
8.3 Sawing along the scribe mark
The cutting indicator
[10-2]
displays the cutting
line for 0° and 45° cuts (without guide rail).
8.4 Cutting sections
Place the machine with the front part of the saw ta-
ble on the workpiece, switch the machine on, press
it down to the preset cutting depth and push it for-
ward in the cutting direction.
8.5 Sawing cut outs (plunge cuts)
In order to avoid kickbacks, the following in-
structions must be observed without fail
when plunge cutting:
Always place the machine with the rear edge of
the saw table against a fixed stop.
When working with the guide rail, place the ma-
chine against the kickback stop FS-RSP (acces-
sory)
[12-4]
clamped to the guide rail.
Procedure
Position the machine on the workpiece and
push up against a stop (kickback stop).
Switch on the machine.
WARNING
Dust hazard
Dust can be hazardous to health. Always work
with a dust extractor.
Always read applicable national regulations be-
fore extracting hazardous dust.
Battery flat or machine overloaded:
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool TSC55REB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool TSC55REB in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 20,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info