796182
17
Verklein
Vergroot
Pagina terug
1/107
Pagina verder
Cordless reciprocating saw RSC 18
Max. pendulum stroke 3 mm
Max. material strength Wood 230 mm
Metal 20 mm
Max. cutting depth in tubes Ø 175 mm
Weight excl. battery pack 4.3 kg
5 Parts of the device
[1-1] Tool holder
[1-2] Pendulum stroke switch
[1-3] Slide switch for stroke rate control
[1-4] Safety lock
[1-5] Variable speed trigger
[1-6] Rear gripping surface
[1-7] Battery pack
[1-8] Buttons for releasing the battery pack
[1-9] Capacity indicator button on battery
pack
[1-10] Capacity indicator
[1-11] Front gripping surface
[1-12] Saw table locking/unlocking device
[1-13] LED lighting
[1-14] Saw table
[1-15] Extraction adapter
[1-16] Scaffold hook
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Battery pack
Before using the battery pack, check that the
battery interface is clean. Any contamination of
the battery interface may impair correct contact
and lead to the contacts being damaged.
A faulty contact may result in the machine over
heating or being damaged.
[2A] Remove the battery pack.
[2B]
klick
Insert the battery pack – until it
clicks into place.
Further information about the charger and
battery pack with capacity indicator can be
found in the corresponding operating
manual.
7 Transport and storage
CAUTION
Risk of fire due to short circuit
Risk of injury
Transport and storage of the power tool
with ejected saw blade and disconnected
from the battery pack.
Remove the battery pack [1-7] (see sec
tion 6).
Remove the saw blade (see section 9.3).
Push in the scaffold hook [1-16].
Transport and store the power tool in a
Systainer.
8 Commissioning
8.1 Switching on/off
CAUTION! Do not press the variable speed trig
ger [1-5] until the power tool has been moved
into the working position.
Deactivate the safety lock [1-4].
Press the variable speed trigger = ON
Release the variable speed trigger = OFF
The LED lighting [1-13] lights up when the
variable speed trigger is pressed.
The stroke rate can be continuously adjus
ted, relative to the pressure applied to the
variable speed trigger.
9 Settings
WARNING
Risk of injury
Activate the safety lock [1-4] and remove
the battery pack from the power tool before
performing any work on the power tool.
9.1 Electronics
Stroke rate control
You can use the variable speed trigger [1-5] to
continuously adjust the stroke rate in the stroke
rate range (see section 4). If necessary, the up
per stroke rate can be limited using a slide
switch [1-3]. This enables you to optimise the
cutting speed to suit each application.
English
17
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool RSC 18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool RSC 18 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info