796182
16
Verklein
Vergroot
Pagina terug
1/107
Pagina verder
Keep the handle dry, clean and free of oil
and grease. Never cut into unknown mate
rials and keep the cutting line above and
below the workpiece free from obstacles.
If the saw blade hits an object, kickback can
occur on the power tool.
Keep your hands away from the sawing
area. Do not reach under the workpiece.
There is a risk of injury in the event of con
tact with the saw blade.
Keep your working area clean. Material
mixtures are particularly dangerous. Light
metal dust may burn or explode.
Improve the blood circulation in your fin
gers by relaxing your hands and exercis
ing your fingers in the breaks between
working. Vibrations during long periods of
work can result in blood vessel disorders
and disorders of the nervous system in fin
gers, hands and wrists.
Harmful/poisonous dust may be produced
when working (e.g. paint products con
taining lead and some types of wood).
Contact with or inhalation of this dust may
pose a risk for the operating personnel or
persons in the vicinity. Comply with the
safety regulations that apply in your coun
try. Connect the power tool to a suitable
dust extractor.
Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
Wear suitable personal protective equip
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for changing tools.
Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
2.4 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level LPA = 87 dB(A)
Sound power level LWA = 98 dB(A)
Uncertainty K = 5 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
Sawing chipboard / wooden
beams ah = 11 m/s2
K = 3 m/s2
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
The cordless reciprocating saw is designed to
saw wood, plastic, metal and construction ma
terials. It is suited to straight and curved cuts.
Flush-mounted separation is possible if corre
sponding suitable bimetal saw blades are used.
Materials containing asbestos must NOT be
processed.
intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for improper or non-in
tended use.
4 Technical data
Cordless reciprocating saw RSC 18
Motor voltage 18 V
Stroke rate 0–3000 rpm
Stroke length 32 mm
English
16
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool RSC 18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool RSC 18 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info