499893
12
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
12
CMS-TS-55-R
GB
Do not remove loose splinters, chips and similar
parts on the workpiece by hand from the area
around the rotating saw blade.
Do not use the work bench outdoors in the rain.
Do not saw "freehand", i.e. guide the workpiece
by hand without a stop or ruler.
Prior to initial operation, make sure that the por-
table circular saw is secured correctly in the re-
taining panel and that this is attached to the
CMS-GE properly.
Always make sure the protective cover is secured
properly before operating the CMS-TS-55-R.
Use the push stick to guide the workpiece safely
past the saw blade.
Support long workpieces at the removal end.
The tabletop should not be damaged in any way
(e.g. cuts around the saw opening). Replace the
tabletop immediately, if damaged.
Do not use the CMS-TS-55-R to cut firewood.
Secure round timber on either side of the saw
blade to prevent it from turning.
Avoid overloading the portable circular saw.
Wear suitable protection:
such as ear protec-
tion, safety goggles, a dust mask for work which
generates dust, and protective gloves when
working with raw materials and when changing
tools.
5.2 Other risks
In spite of compliance with all relevant design reg-
ulations, dangers may still present themselves
when the machine is operated, e.g.:
Workpiece parts being thrown off,
Parts of damaged tools being thrown off,
Noise emissions,
Dust emissions.
6Assembly
The following section describes the process of in-
stalling the portable circular saw in the retaining
panel and the basic unit CMS-GE. Removal is per-
formed in reverse sequence to installation.
Before installing the plunge-cut saw, move the
viewing window/splinterguard on the machine
to the highest position.
6.1 Installing the cutting depth adjuster
Adjust the cutting depth stop on the portable
circular saw
[2-2]
to approx. 30 mm.
Remove the screw
[2-1]
from the cutting depth
adjuster.
Slide the cutting depth adjuster over the addi-
tional handle on the portable circular saw, as
shown in Fig.
[3]
.
Adjust the cutting depth stop on the portable
circular saw
[2-2]
to 55 mm.
Push the circular saw downwards until the cut-
ting depth adjuster rests on the circular saw.
Tighten the screw in the cutting depth adjuster
to secure to the portable circular saw base
[4-
1]
.
Set the cutting depth stop on the portable circu-
lar saw to the maximum cutting depth.
6.2 Installing the portable circular saw in
the retaining panel [1-5]
Turn the saw retainer over and position in the
opening on the CMS-GE.
Unscrew the rotary knobs on both retainers
[5-
3] + [5-6]
.
Slide the movable retainer
[5-3]
as far outwards
as possible.
Insert the portable circular saw in such a way
that the saw base rests against the fixed retain-
er
[5-6]
.
Adjust both jaws
[5-5]
until the portable circular
saw is sitting on the guide groove
[5-4]
on the
retaining panel and there is no play.
Slide the movable retainer
[5-3]
up to the stop
on the portable circular saw base.
Tighten the rotary knobs on both retainers
[5-3]
+ [5-6]
.
The portable circular saw should now be securely
fixed to the retaining panel.
Check
this before con-
tinuing assembly.
6.3 Joining the protective cover bracket [1-
7] to the guide wedge
Unscrew the locking knob
[5-2]
for cutting
depth adjustment.
Push down the portable circular saw until the
cutting depth indicator
[5-1]
shows approx. 20
mm.
Tighten the locking knob
[5-2]
.
Slide in the protective cover bracket
[6-1]
onto
the guide wedge
[6-2]
until the holes are
WARNUNG
Risk of injury, electric shock
Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool CMS TS 55 R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool CMS TS 55 R in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info